Abstract:Acoustic lining treatments are widely used in modern aircraft engines for noise reduction. The key to the successful application of this technique is to establish a link between the geometry parameters (thickness, hole diameters, etc.) and the acoustic impedance. To achieve this goal, the impedance eduction technique is widely used by the aircraft engine noise research community. The technique iteratively finds an impedance value that leads to the best fit between the predicted and experimental results. More recently, comparative studies have shown that, in the presence of flow, the acoustic impedance educed from a liner test-rig with an upstream acoustic excitation is different from that of the same liner subject to a downstream acoustic excitation. This discrepancy is surmised to be attributed to the Ingard-Myers boundary condition. The current work attempts to provide more information about the influence of boundary layer effect on the educed impedance when the acoustic source is exerted either upstream or downstream. A duct acoustic model for a non-uniform flow with a thin but finite-thickness sheared boundary layer over the liner is developed for impedance eduction. An alternative boundary condition is derived from the Pridmore-Brown equation using the perturbation method that gives rise to an effective impedance to be enforced at the interface between the sheared boundary layer and core flow region carrying a uniform mean flow. Then, a modified impedance eduction technique procedure is developed and used to obtain the liner impedance using a flow duct facility and the result is compared with that based on the Ingard-Myers condition. Results show that considering the sheared flow effect in the impedance eduction makes no significant improvement to the educed impedance for liners used in the experiment.

RESEARCH ON THE SOUND PROPAGATION AND RADIATION IN A DUCT WITH A NON-LOCALLY REACTING LINER

On Modeling the Sound Propagation Through a Lined Duct with a Modified Ingard-Myers Boundary Condition

Study on Influencing Factors for Sound Radiation Characteristics of Finite Length Cylindrical Shells

Vibro-Acoustics Characteristics of Non-Uniform Ring Stiffened Cylindrical Shells Using Wave Propagation Approach

Sound Wave Scattering in a Flow Duct with Azimuthally Non-Uniform Liners

Theoretical Study of Sound Propagation in Lined Duct with Rigid Splices Using Wiener-Hopf Method

Construction of acoustic model and simulation of sound absorption of aero-engine composite acoustic liner

An improved multimodal method for sound propagation in nonuniform lined ducts

Investigation of Extended-Tube Liners for Control of Low-Frequency Duct Noise

Identification of Duct Modes Incident from Sources to the Liner Based on Measurements of the Array in the Section Near the Inlet

A preliminary study of the acoustic attenuation of a thin acoustic liner

Low Frequency Duct Noise Control Using Extended Tube Liners

Effect of the microstructure on the acoustic performance of porous material liner in the duct

A hybrid finite element approach to modeling sound radiation from circular and rectangular ducts

Theoretical Model of Scattering from Flow Ducts with Semi-Infinite Axial Liner Splices

Experimental study on vortex sound interaction of acoustic resonance and its suppression in a flow duct

Theoretical Study and Numerical Validation of Sound Radiation from Coaxial Annular Duct

Effect of source direction on liner impedance eduction with consideration of shear flow

Stability Analysis and Design of Time-Domain Acoustic Impedance Boundary Conditions for Lined Duct with Mean Flow

Optimality analysis of bulk-reacting liners based on mode-merging design method

Investigation of Low-Frequency Sound Radiation Characteristics and Active Control Mechanism of a Finite Cylindrical Shell