Abstract:Background: The power density of optical excitation on microfluidic chips is attenuated due to the beam divergence of the optical fiber, making it difficult to collect either the emission or scattering light. The excitation power and coupling efficiency can be significantly increased by using an on-chip microlens system with integrated optical fibers, specially designed and simulated to reshape and collect the optical signal within the microfluidic chip. Objective: This article presents research work for designing, fabricating, and testing a type of on-chip microlens. The on-chip microlens was designed by Code V → lens design software, and numerical simulations were conducted to optimize the distance between the optical elements. The air microlens was produced using a direct lithograph of SU-8 photoresist. Results and conclusion: The export light beam could be focused to a very small point to satisfy the requirements of the fluorescence excitation of samples. On the other hand, the detection efficiency could also be increased with the help of the on-chip microlens. The presented fabrication method does not require any assembly process or external driving force. To fabricate a microlens with a different focus, it is only necessary to change the figures on the mask. This technique can be used in a variety of applications as it is possible to produce customized microlens for specific applications.

Research on Micro Fluidic Chips Used for Bioluminescence Detection

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

A Hybrid-Structured Microfluidic Chip Developed for Atp Bioluminescence Detection

The microfluidic chip fabricated by Hot Embossing Lithography for single- microsphere test

Fabrication of pneumatic micropump on glass-PDMS microfluidic chip and its application to chemiluminescence detection

Preparation Of Micro Fluidic Chip Based On Su-8 Mold

An LED-induced fluorescence detection system with integrated on-chip lens based on microfluidic chips technology

Fabrication of SU-8 Photoresist Micro–nanofluidic Chips by Thermal Imprinting and Thermal Bonding

SU8 Lithography Process in Fabrication of Transparent Microfluidic Chips

Fabrication of Microfluidic Focusing Chip for Bioinstrumentation

Combined fluorescence with absorbance detection optical system used for microfluidic chips

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Design and fabrication of a microfluidic detection chip

Fabrication Of Microfluidic Chip And Its Application

Recent Progress of Fluorescence Detection Systems of Microfluidic Chip

Integrated on-chip lens applied to microfluidic chips

Review on application of chemiluminescent detection for microfluidic chip

Design and Fabrication of Micro Hot Embossing Mold for Microfluidic Chip Used in Flow Cytometry

A Low-Cost Method of Fabricating Hybrid Micro-Nano Fluidic Chip by Double-Layer PDMS Mold and UV–thermal Nanoimprinting

Microfluidic Chip for Detecting the Expression of Green Fluorescent Protein in Bacillus Subtilis.

Chemiluminescence micro-flow-injection analysis on a chip.