Abstract:Abstract—In Cooling storage ring External-target Experiment (CEE) in Heavy Ion Research Facility in Lanzhou (HIRFL), Multi-gap Resistive Plate Chambers (MRPC) detectors are utilized for high precision Time Of Flight (TOF) measurement. Especially for some Internal TOF (iTOF) detectors, which is designed to identify the particles scattered after the ion beam hit the target, a very high precision of the time measurement (detector together with the electronics are required to be less than 50 ps in total) is required, which requires the time precision of the readout electronics to be less than 10 ps RMS. Based on our previous work on the readout electronics system of the start time (T0) detector in CEE, we design this porotype to verify our scheme, which contains a Front-End Electronics (FEE) module utilizing NINO ASIC to achieve the low-noise, high-precision discrimination and a Time Digitization Module (TDM) with double-chain Tapped Delay Line (TDL) Field Programmable Gate Array (FPGA) Time to Digital Convertors (TDCs) implemented in Xilinx Artix-7 FPGA. By constraining the TDLs at appropriate positions and choosing a main clock of 320 MHz according to the transmission speed of the hit signal on the TDL, we optimize the Differential NonLinearity (DNL) of the TDL. According to the test results, a 7.1 ps RMS time precision of the TDM is achieved. We also test the performance of the whole system under different input signal charges and the results indicate that the prototype achieves the expectations.

Prototype Front End Electronics of TO Detector in the External Experiment of CSR in HIRFL

Readout Electronics of T0 Detector in the External Target Experiment of CSR in HIRFL

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

A Prototype Design of the Readout Electronics of MRPC Detectors in CEE in HIRFL

Readout Electronics Prototype of TOF Detectors in CEE of HIRFL

The Prototype Readout Electronics System for the External Target Experiment in CSR of HIRFL

Design and performance testing of a T0 detector for the CSR External-target Experiment

Extensive Beam Test Study of Prototype MRPCs for the T0 Detector at the CSR External-Target Experiment

Prototype Design of the Time Measurement Circuit for SiPM-based T0 Detector of CEE

R & D of prototype iTOF-MRPC at CEE

Design and preliminary performance of a novel mixed-signal front-end electronics with post digital shaping for CZT detectors

A 16-Channel High-Resolution Time and Charge Measurement Module for the External Target Experiment in the Csr of Hirfl

A miniature prototype of Time Projection Chambers for CSR External-Target Experiment

A T0/Trigger detector for the External Target Experiment at CSR

FPGA Based Pico-second Time Measurement System for a DIRC-like TOF Detector

Beam test study of the MRPC-based T0 detector for the CEE

Development of Readout Electronics System of Detector for the External Target Experiment in CSR

The external time-of-flight wall for CEE experiment

A Prototype of the Timing Electronic System for the CALICE SDHCAL

The prototype of the front-end electronics for STCF muon detector

Design of a Prototype Readout Electronics with a Few Picosecond Time Resolution for MRPC Detectors