Abstract:Abstract—In Cooling storage ring External-target Experiment (CEE) in Heavy Ion Research Facility in Lanzhou (HIRFL), Multi-gap Resistive Plate Chambers (MRPC) detectors are utilized for high precision Time Of Flight (TOF) measurement. Especially for some Internal TOF (iTOF) detectors, which is designed to identify the particles scattered after the ion beam hit the target, a very high precision of the time measurement (detector together with the electronics are required to be less than 50 ps in total) is required, which requires the time precision of the readout electronics to be less than 10 ps RMS. Based on our previous work on the readout electronics system of the start time (T0) detector in CEE, we design this porotype to verify our scheme, which contains a Front-End Electronics (FEE) module utilizing NINO ASIC to achieve the low-noise, high-precision discrimination and a Time Digitization Module (TDM) with double-chain Tapped Delay Line (TDL) Field Programmable Gate Array (FPGA) Time to Digital Convertors (TDCs) implemented in Xilinx Artix-7 FPGA. By constraining the TDLs at appropriate positions and choosing a main clock of 320 MHz according to the transmission speed of the hit signal on the TDL, we optimize the Differential NonLinearity (DNL) of the TDL. According to the test results, a 7.1 ps RMS time precision of the TDM is achieved. We also test the performance of the whole system under different input signal charges and the results indicate that the prototype achieves the expectations.

The external time-of-flight wall for CEE experiment

Beam Test Result of the Sealed MRPC Prototype for CEE-eTOF

R & D of prototype iTOF-MRPC at CEE

The Cbm Time-Of-Flight Wall - A Conceptual Design

A miniature prototype of Time Projection Chambers for CSR External-Target Experiment

Design and performance testing of a T0 detector for the CSR External-target Experiment

Readout Electronics Prototype of TOF Detectors in CEE of HIRFL

Extensive Beam Test Study of Prototype MRPCs for the T0 Detector at the CSR External-Target Experiment

Development of a MWDC Prototype of the CSR External-Target Experiment

Simulation and Prototype Testing of Multi-Wire Drift Chamber Arrays for the CEE

A Realistic Design of the Cbm-Tof Wall Based on Modules Commissioned In-Beam

Beam test results of the prototype of the multi wire drift chamber for the CSR external-target experiment

A Prototype Design of the Readout Electronics of MRPC Detectors in CEE in HIRFL

Design and Construction of a Time-of-flight Wall Detector at External Target Facility of HIRFL-CSR

Laser Test of the Prototype of CEE Time Projection Chamber

Prototype Front End Electronics of TO Detector in the External Experiment of CSR in HIRFL

Simulation Studies of the Beam Monitor for the CSR External-Target Experiment

A T0/Trigger detector for the External Target Experiment at CSR

Beam test study of the MRPC-based T0 detector for the CEE

The Topmetal-CEE Prototype, a Direct Charge Sensor for the Beam Monitor of the CSR External-Target Experiment

Prototype Studies on the Forward MWDC Tracking Array of the External Target Experiment at HIRFL-CSR