Abstract:MoO3/SiO2 catalyst was prepared by sol-gel method at low temperature, in which ammonium heptamolybdate and tetraethoxysilane (TEOS) were used as molybdenum and silica precursor, respectively. The catalyst samples were characterized by N-2 adsorption, XRD and FT-IR. The results show that the MoO3/SiO2 has higher surface area (e. g. A = 363.8 m(2)/g for 10% MoO3/SiO2) and MoO3 is highly dispersed on SiO2. Different acidic hydrolysts (HCl, HNO3 and HAc) used in the preparation of catalyst can affect obviously the surface area of MoO3 /SiO2 catalyst and the dispersion of MoO3 on SiO2. MoO3 /SiO2 catalyst, prepared using HCl as acidic hydrolyst, exhibits higher surface area and more uniform dispersion of MoO3 on support than that prepared using other hydrolysts. The catalytic performance of MoO3/SiO2 for the epoxidation of propylene to propylene oxide by 30% cumene hydroperoxide was examined and the effects of reaction conditions (such as temperature, time, pressure, solvent and basic depressor) were studied in detail. The results show that the tertbutanol is an available solvent and the epoxidation of propylene can be promoted by adding basic depressor into the solvent. When NaHCO3 (p = 2.5 g/L) was used as basic depressor, the selectivity for propylene oxide could increase. 15%MoO3/SiO2 catalyst, prepared using HCl as acidic hydrolyst, showed higher activity and selectivity for propylene oxide, for instance, using tert-butanol as solvent and at 110 degreesC and 0.6 MPa for 2 h, the conversion of cumene hydroperoxide is 89% and the selectivity for propylene oxide is 80%.

Study on Molybdenum-glycol Complex Catalyst for Epoxidation of Propylene

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Catalytic Epoxidation of Propylene to Propylene Oxide by Cumene Hydroperoxide

The Molybdenum Species of MoO3/SiO2 and Their Catalytic Activities for the Epoxidation of Propylene with Cumene Hydroperoxide

Study on Ag-Mo Catalyst for Direct Vapor-Phase Epoxidation of Propylene by Molecular Oxygen

Theoretical study of propylene epoxidation heterogeneous-homogeneous mechanism overMoO<sub>x</sub>/SiO<sub>2</sub>catalyst

Epoxidation of Propylene with Cumene Hydroperoxide over Moo3/Sio2 Catalyst Prepared by Sol-Gel Method

Mo-functionalized MCF Meso-Material and Its Catalytic Performance for Epoxidation of Propylene by Cumene Hydroperoxide

Preparation of Ag-MoO3/Molecular Sieves Catalysis for Vapor-phase Epoxidation of Propylene to Propylene Oxide

Epoxidation of Propylene by Molecular Oxygen over Modified Ag–MoO 3 Catalyst

Effects of Preparation Procedure in Sol–gel Method on Performance of MoO3/SiO2 Catalyst for Liquid Phase Epoxidation of Propylene with Cumene Hydroperoxide

Epoxidation of Propylene over Ag/MgO Catalysts Modified Na~+ and Halogen Anions

Recent Progress in Mo-containing Catalysts for Liquid Phase Epoxidation of Olefins

Enhanced Oxygen Transfer over Bifunctional Mo-based Oxametallacycle Catalyst for Epoxidation of Propylene

Epoxidation of Propylene by Molecular Oxygen over Unsupported AgCu X Bimetallic Catalyst

High Catalytic Performance of MoO3‐Bi2SiO5/SiO2 for the Gas‐Phase Epoxidation of Propylene by Molecular Oxygen

Bulky olefin epoxidation under mild conditions over Mo-based oxide catalysts

Epoxidation of Propylene by Molecular Oxygen over the Ag–Y2O3–K2O/α-Al2O3 Catalyst

Characterization and catalytic performance of supported molybdophosphoric acid catalysts for the oxidation of propylene to acetone

Direct Epoxidation of Propylene with Molecular Oxygen over Ag–MoO3/ZrO2 Catalyst

Direct epoxidation of propylene by molecular oxygen over Y2O3 and K2O-promoted Ag/α-Al2O3 catalyst