Abstract:As an important part of laboratory chip (LOC) and micro-total analysis system (mu TAS), micro-mixer has been widely used in the fields of biological analysis and chemical synthesis, most of which are used in the pre-treatment part of the detection system to achieve sufficient mixing of detection samples and reagents and improve the detection accuracy and efficiency. In this work, a novel planar passive micro-mixer with narrow slits and obstacles arranged in a pentagonal mixing chamber was designed. The new micro-mixer made full use of the fluid jet characteristics and the vortex principle of the baffles to enhance the fluid disturbance and break the laminar state of fluid flow, which could effectively promote fluid mixing. The accuracy of numerical simulation was verified by the experimental method combining high-speed photography and Micro. PIV system, and the flow characteristics and mixing mechanism of the micro-mixer at different Reynolds Numbers (Re) were summarized. Under the premise of comprehensive consideration of the mixing index and pressure drop, the effects of the slit width, the gap width, the mixing chamber shape and the obstacle shape of the mixing performance and flow characteristics of the micro-mixer were analyzed. The results showed that the narrowing of the slit width could significantly improve the mixing index and achieve efficient mixing. When Re <= 5 and Re >= 20, the optimized pentagonal mixing chamber micro-mixer could increase the mixing index while reducing the pressure drop due to the introduction of the progressive expansion structure compared with the quadrilateral mixing chamber micro-mixer; When Re >= 20, the I-shaped baffle and the grooved baffle led to a higher mixing index than that the rectangular baffle. The results are helpful for the design and development of micro-mixers with efficient mixing function in microfluidic and micro-total analysis pre-processing parts.

Influence Of Geometric Configuration On Mixing Performance Of Planar Chaotic Micro-Mixer

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Influence of Structural Parameters on the Performance of an Asymmetric Rhombus Micromixer with Baffles

An Investigation of Chaotic Mixing Behavior in a Planar Microfluidic Mixer

Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles

Investigation of Efficient Mixing Enhancement in Planar Micromixers with Short Mixing Length

Mixing Performance Analysis and Optimal Design of a Novel Passive Baffle Micromixer

INFLUENCE OF EXPANDED CAVITY ON MIXING PERFORMANCE OF SQUARE-WAVE MICRO-MIXER

Numerical and Experimental Investigation on a "Tai Chi"-Shaped Planar Passive Micromixer

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Numerical Analysis on a Passive Chaotic Micromixer with Helical Microchannel

Realization of planar mixing by chaotic velocity in microfluidics

Mixing Enhancement in a Chaotic Micromixer with Reversed Ridges and Grooves

Study on Flow Characteristics and Influencing Factors in Square Wave Micromixer

Staggered Oriented Ridges Micromixer Based on Chaotic Advection

Effect of structural parameters on fluid flow and mixing characteristics in micromixer with gaps and baffles

Numerical and Experimental Analyses of Planar Micromixer with Gaps and Baffles Based on Field Synergy Principle

Theoretical And Experimental Aanalysis Of Chaotic Mixing Efficiency Of Plug Flow In Different Geometry

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Investigations into planar splitting and recombining micromixers with asymmetric structures

Numerical Investigation of Multiscale Lateral Microstructures Enhancing Passive Micromixing Efficiency Via Secondary Vortex Flow