Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

Investigation of Efficient Mixing Enhancement in Planar Micromixers with Short Mixing Length

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles

An Investigation of Chaotic Mixing Behavior in a Planar Microfluidic Mixer

Influence of Structural Parameters on the Performance of an Asymmetric Rhombus Micromixer with Baffles

Mixing Performance Analysis and Optimal Design of a Novel Passive Baffle Micromixer

Mixing Enhancement of a Passive Microfluidic Mixer Containing Triangle Baffles

Numerical Investigation of Multiscale Lateral Microstructures Enhancing Passive Micromixing Efficiency Via Secondary Vortex Flow

Investigations into planar splitting and recombining micromixers with asymmetric structures

Numerical and Experimental Analyses of Planar Micromixer with Gaps and Baffles Based on Field Synergy Principle

Micromixing Enhancement in a Novel Passive Mixer with Symmetrical Cylindrical Grooves

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

Influence Of Geometric Configuration On Mixing Performance Of Planar Chaotic Micro-Mixer

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

A Three-Dimensional Micromixer Using Oblique Embedded Ridges

Investigations of the mixing efficiency of five novel micromixer designs with backward arrow inlet using the Villermaux Dushman protocol

Mixing Enhancement in a Chaotic Micromixer with Reversed Ridges and Grooves

An Effective Splitting-And-Recombination Micromixer With Self-Rotated Contact Surface For Wide Reynolds Number Range Applications

Numerical Investigation on the Efficient Mixing of Overbridged Split-and-recombine Micromixer at Low Reynolds Number

Numerical and Experimental Analyses of Planar Asymmetric Split‐and‐recombine Micromixer with Dislocation Sub‐channels

A Comparative Discussion of Different Designs of Passive Micromixers: Specific Sensitivities of Mixing Efficiency on Reynolds Numbers and Fluid Properties