Abstract:Transport of ions across semipermeable membranes, like ion-exchange membranes, and salt bridges, like porous frits, each results in electric potential differences that are sensed in most electrochemical experiments. While often neglected, these electric potential differences can significantly impact the interpretation of experimental results. To assist in comprehension of these concepts, a one-to-two-hours-long hands-on laboratory activity, intended for students in electroanalytical chemistry courses, was designed, implemented, and evaluated. This activity requires that students construct a simple two-compartment electrochemical cell from inexpensive and readily available disposable plastic cuvettes, commercially available polymeric ion-exchange membranes, two nominally identical reference electrodes placed in liquid electrolytes that wet each side of the membrane, and a voltmeter or a potentiostat to measure the open-circuit potential between the reference electrodes, i.e. the cell potential. Using commercially available reference electrodes, each consisting of a wire (e.g. Ag/AgCl) immersed in a fritted tube containing an aqueous electrolyte, measured open-circuit potentials report on the magnitude of both Donnan and liquid-junction electric potential differences. These electric potentials are sensitive to the composition of ions in each electrolyte, through interactions with the ion-exchange membrane and porous frits at the tip of each reference electrode. When a cation-exchange membrane separates aqueous solutions consisting of different concentrations of hydrochloric acid (HCl) or potassium hydroxide (KOH), the cell responds like a pH or pK probe, respectively, because the membrane interfaces are more sensitive to the activity of H+ and K+ over Cl– and OH–, respectively. Analogously, when an anion-exchange membrane is used, the cell responds like a pCl or pOH probe, respectively, because the membrane interfaces are more sensitive to the respective activity of Cl– and OH– over H+ and K+. When the solutions contain large concentrations of multiple types of ions, measured open-circuit potentials typically deviate from these Donnan-dominated effects and are instead dominated by a liquid-junction-like effect where electric potentials within and across ion-exchange membranes form due to differences in the permeabilities of the ions. When reference electrodes consist of wires immersed directly into the aqueous electrolytes that wet the membranes, and not in fritted tubes, measured open-circuit potentials also include contributions from the chemical potential of redox-active species that are present in the aqueous electrolytes. While this hands-on laboratory activity is suitable for most upper-level undergraduate students in physical science and engineering disciplines, the concepts of Donnan electric potential, liquid-junction electric potential, and species chemical potential are advanced enough to educate graduate students and senior researchers alike. Our activity also helps instructors teach a topic that is pertinent to the electrochemistry of many aqueous chemical systems using simple components and a straightforward setup.

About Teaching the Overpotential and Decomposition Potential

Concentration Polarization and Water Decomposition of Electrodialysis

Electrochemical Polarization I . A Theoretical Analysis of the Shape of Polarization Curves

Teaching the concepts of Donnan potential and liquid-junction potential by evaluating homemade pH and ion-sensitive probes constructed using commercial ion-exchange membranes and reference electrodes

Experiment Reform of Determination of Polarization Curve in Physical Chemistry Experiment

Advanced characterization of alkaline water electrolysis through electrochemical impedance spectroscopy and polarization curves

A Hands-On Approach to Understanding Electrochemistry for Middle and High School Students

PRESENT STATUS AND DEVELOPMENT ON ELECTROCHEMISTRY AT HIGH TEMPERATURES AND HIGH PRESSURES AQUEOUS SYSTEMS

Study on in-situ electrochemical impedance spectroscopy measurement of anodic reaction in SO 2 depolarized electrolysis process

Factors that prevent learning in electrochemistry

Enhancing the Understanding of Hydrogen Evolution and Oxidation Reactions on Pt(111) Through Ab Initio Simulation of Electrode/Electrolyte Kinetics

Electrochemical Reactions at the Electrode/solution Interface: Theory and Applications to Water Electrolysis and Oxygen Reduction

(Invited) From Electronic Conductivity Measurement to Its Role on Oxygen Electrode Delamination Phenomena: A Brief Review

Enhancing Electrochemistry Education with Supercapacitor Charging and Discharging Computational Experiments

Determination of Polarization Curve of Zinc and Application Experiment

Fundamentals of Electrochemistry (Iv)-Electrode Kinetics

Teaching and Learning Electrochemistry

Electrochemical Pedagogy

Overpotential decomposition enabled decoupling of complex kinetic processes in battery electrodes

Electrode Reaction Induced Ph Change at the Pt Electrode/electrolyte Interface and Its Impact on Electrode Processes

Understanding the Influence of Electrode Potential on Differently Charged Hydrogen Sources in a Hydrogen Evolution Reaction under Neutral Environments