Abstract:This work attempts to prepare ethylene-a-olefin copolymer with relatively narrow composition distribution by modification of TiCl4/MgCl2 type supported Ziegler-Natta catalyst. A TiCl4/ID/MgCl2 type catalyst, where ID is a diester, was treated at room temperature with 2,6-'Pr2C6H3-OH at phenol: Ti molar ratio of 1:1 and the modified catalyst was analyzed for contents of titanium and aryloxy group. It was found that about one third of the titanium atoms in the modified catalyst (M-cat) was connected with an aryloxy group, but its Ti content was decreased to 1.44 wt% from 2.36 wt% of the original catalyst (O-cat). Ethylene-1-hexene copolymerization was conducted in n-heptane with M-cat or O-cat as catalyst and triisobutyl aluminium or methylaluminoxane as cocatalyst. The M-cat showed similar activity as the O-cat in catalyzing the copolymerization, but presented a weaker comonomer activation effect than the latter. The 1-hexene content of copolymer synthesized by M-cat was lower than that of the product of O-cat at the same conditions, but had a markedly narrower composition distribution. Each copolymer sample was fractionated into two fractions by extraction with boiling n-heptane, and the soluble part contains much more 1-hexene units than the insoluble part. The ratio of I-hexene content in the soluble fraction to that of the insoluble fraction was higher than 18 in copolymer prepared with O-cat, but this ratio was reduced to 3.7 when M-cat was used as the catalyst. On the other hand, the soluble part of copolymer prepared with M-cat showed a more random sequence distribution than that of the O-cat. The distributions of active centers in both the M-cat and O-cat were studied by deconvolution of the polymer's molecular weight distribution curves with multiple Flory most-probable distribution function. Both catalysts showed a broad molecular weight distribution that can be ascribed to 5 similar to 6 types of active centers, but the introduction of aryloxy group in the catalyst caused marked changes in the active center distribution. Possible mechanism of the catalyst modification was proposed.

Polymer-Supported Catalyst for Olefin Polymerization

Effect of Catalysts Supporting on Tandem Polymerization of Ethylene Stock in Synthesis of Ethylene-1-Hexene Copolymer

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Characteristics of Titanocene Catalyst Supported on Palygorskite for Ethylene Polymerization

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Characteristics of Palygorskite Supported Cp_2 TiCl_2 Catalysts for Ethylene Polymerization

Immobilizing TiCl3/(n-BuCp)2ZrCl2 catalyst on organic/inorganic support for gas-phase ethylene polymerization

Synthesis And Evaluation Of Two New Fi-Ti Catalysts For Living Polymerization Of Ethylene

TiCl4 Immobilized on a Composite Support SiO2/MgCl2·x(1,4‐butanediol)/poly[styrene‐co‐(acrylic Acid)] for Ethylene Polymerization: the Barrier Effect of Poly[styrene‐co‐(acrylic Acid)]

Ethylene/α‐olefin Copolymerization Using Diphenylcyclopentadienyl‐phenoxytitanium Dichloride/al(ibu)3/[ph3c][b(c6f5)4] Catalyst Systems

Ethylene/1‐hexene Copolymerization with Supported Ziegler–Natta Catalysts Prepared by Immobilizing TiCl3(OAr) Onto MgCl2

Ethylene-1-Hexene Copolymerization with A 2,6-Diisopropylphenol Modified Supported Ziegler-Natta Catalyst

Influence of Cocatalyst on High Temperature Polymerization of Propylene Catalyzed by Ziegler-Natta Catalyst

Preparation and Characterization of SBA‐15 Supported Iron(ii)‐bisimine Pyridine Catalyst for Ethylene Polymerization

Study on catalytic system of supported metallocene with substituted cyclopentadienyl using modified Al2O3 as support for olefin polymerization

Copolymerization of ethylene and 1-octene catalyzed by a modified Ziegler-Natta catalyst

With different structure ligands heterogeneous Ziegler–Natta catalysts for the preparation of copolymer of ethylene and 1-octene with high comonomer incorporation

Ethylene/1-Octadecene Copolymerization Using [Eta(5):Eta(1)-C5me4-4-R-1-6-R-C6h2o]Ticl2 Catalysts

Synthesis and performance of olefin copolymers produced with monocyclopentadienyl titanium phosphinimide complex as viscosity modifiers

Binuclear Heteroligated Titanium Catalyst Based on Phenoxyimine Ligands: Synthesis, Characterization, and Ethylene (Co)polymerization

Preparation and Characterization of TiCl4/MgCl2-SiO2 Di-Support Catalyst System for Copolymerization of Ethylene with 1-Hexene