Abstract:A combined steady-state and transient approach is employed to investigate the corrosion behavior of X80 pipeline steel in carbon dioxide-saturated brines. Continuous bubbling of carbon dioxide into a test vessel with 1 liter capacity is performed to simulate the flowing condition. The measurement of time-dependent open-circuit potential, polarization resistance, and electrochemical impedance spectroscopy (EIS) is conducted to interpret the evolution of dissolution processes at the corroding interface. Three distinguishing stages are observed at a temperature of 60 °C during a whole exposure of 144 h. Analyses mainly based on the consecutive mechanism show that after the first stage of the active-adsorption state, the anodic reaction is significantly retarded by the accumulation of (FeOH)ads on the iron surface, causing a sharp increase in the polarization resistance and the open-circuit potential, as well as the disappearance of the inductive loop in EIS. At the third stage, the formation of the corrosion product layer similarly reduces both the anodic and cathodic reactions, which arouses a linear increase in the polarization resistance with time and a capacitive loop in EIS but changes the open-circuit potential slightly. An increase in salinity in this study reduces the polarization resistance and enhances iron dissolution by promoting the formation and relaxation of (FeOH)ads; however, it brings little change to the developing time of the three stages obviously. At a low temperature of 20 °C, a protective product layer is not observed in carbon dioxide-saturated brine, and the dissolution of iron is mainly under activation control during the whole exposure. A notable enlarged polarization resistance and different interfacial processes are observed in an alkaline solution compared with those in acidic environments, which is deduced to be resulted from an impedance in the relaxation of (FeOH)ads by increasing pH. The observations in this study support well that the iron dissolution reaction at the initial stage exposed in carbon dioxide aqueous environments is dominant by water adsorption on the iron surface, and further investigation should be performed on the role that carbon dioxide plays in the evolution of corrosion products and the formation of a protective film on the steel surface by taking into account local water chemistry.

EIS Characteristics of Anodic Dissolution for P110 Steel under CO2 Environment

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Effect of temperature on electrochemical corrosion behavior of N80 and KO80SS steels in the stratum water with saturated CO2

The EIS Analysis of Cathodic Reactions During CO2 Corrosion of N80 Steel

THE EIS ANALYSIS OF ELECTRODE REACTIONS OF CO2 CORROSION OF N80 STEEL

EIS Analysis on the Cathode Process of CO2/H2S Corrosion of Tubular Steel N80

Influences of temperature on corrosion behavior of P110 steel

Electrochemical Investigation of the Corrosion Behavior of API 5L-X65 Carbon Steel in Carbon Dioxide Medium

Study on corrosion behavior of P110S steel in CO2-H2S- saturated solution

Research of CO_2 Corrosion Kinetics of Tubing and Casing Steel P110

Study on the CO2 Corrosion Electrochemical Characteristics of 13Cr Steel at High Temperature and High Pressure

Study on the CO2 Corrosion Electrochemical Characteristics of N80 Steel

Electrochemical Behavior and Corrosion Mechanism of X65 Steel in CO_2-saturated Oilfield Water

Investigation on CO2 corrosion behaviors of N80 tubing steel under stress conditions

Electrochemical Characteristic on Iron-oxidizing Bacteria Inducing Pitting Corrosion of 316L Stainless Steel

Relationship Between Dissolved Oxygen and Corrosion Characterization of X80 Steel in Acidic Soil Simulated Solution

Experimental Investigation on Corrosion Behavior of X80 Pipeline Steel under Carbon Dioxide Aqueous Conditions

The relationship between the formation process of corrosion scales and the electrochemical mechanism of carbon steel in high pressure CO 2-containing formation water

Corrosion of N80 carbon steel in oil field formation water containing CO 2 in the absence and presence of acetic acid

Understanding the Corrosion Behavior of P92 Steel in CO2 Using In-Situ Monitoring Technology II: Mechanism of Oxide Scale Peeling

Anti-corrosion Performance of Chromium-coated Steel in a Carbon Dioxide-saturated Simulated Oilfield Brine