Abstract:Composites of polyurea (PU) reinforced with milled glass fiber (MGf) were fabricated. The volume fraction and length of the milled glass fiber were varied to study their effects on the morphological and mechanical properties of the MGf/PU composites. The morphological attributes were characterized with scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The SEM investigations revealed a uniform distribution and arbitrary orientation of milled glass fiber in the polyurea matrix. Moreover, it seems that the composites with longer fiber exhibit better interfacial bonding. It was found from the FTIR studies that the incorporation of milled glass fiber into polyurea leads to more phase mixing and decreases the hydrogen bonding of the polyurea matrix, while having a negligible effect on the H-bond strength. The compression tests at different strain rates (0.001, 0.01, 0.1, 1, 2000 and 3000 s−1) and dynamic mechanical properties over the temperature range from −30 to 100 °C at 1 Hz were performed. Experimental results show that the compressive behavior of MGf/PU composites is nonlinear and strain-rate-dependent. Both elastic modulus and flow stress at any given strain increased with strain rate. The composites with higher fiber volume fraction and longer fiber length are more sensitive to strain rate. Furthermore, the elastic modulus, stress at 65% strain and energy absorption capability were studied, taking into account both the effect of fiber volume fraction and mean fiber length. It is noted that an increase in fiber volume fraction and fiber length leads to an increase in elastic modulus, stress at 65% strain and absorbed energy up to ~103%, 83.0% and 137.5%, respectively. The storage and loss moduli of the composites also increase with fiber volume fraction and fiber length. It can be concluded that the addition of milled glass fiber into polyurea not only improves the stiffness of the composites but also increases their energy dissipative capability.

COMPRESSIVE PROPERTIES OF CHOPPED GLASS FIBER REINFORCED RIGID POLYURETHANE FOAM

FRP-confined Recycled Glass Aggregate Concrete: Concept and Axial Compressive Behavior

Mechanical Properties of Reinforced Reaction Injection Moulding Polyurethane Foam With Long Glass Fibre

Rigid Polyurethane Foams Reinforced by Glass Beads

Effects of Fiber Volume Fraction and Length on the Mechanical Properties of Milled Glass Fiber/Polyurea Composites

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Synthesis and Mechanical Property of Reinforcing Rigid Polyurethane Materials by Glass Fiber

Compressive properties and energy absorption of rigid polyurethane foam

Effect of Fiber Content on Sound Absorption, Thermal Conductivity, and Compression Strength of Straw Fiber-filled Rigid Polyurethane Foams

AXIAL COMPRESSIVE PROPERTIES OF GLASS FIBER-REINFORCED POLYMER-MACROFOAM COMPOSITE COLUMNS

Characteristics of Carbon-Fiber-Reinforced Polymer Face Sheet and Glass-Fiber-Reinforced Rigid Polyurethane Foam Sandwich Structures under Flexural and Compression Tests

Compression and flexural properties of rigid polyurethane foam composites reinforced with 3D-printed polylactic acid lattice structures

Crystallization Behavior and Properties of Glass Fiber Reinforced Polypropylene Composites

Preparation and Properties of Chopped Carbon Fiber Reinforced Polyimide Composite Foams

Experimental Study of the Flexural and Compression Performance of an Innovative Pultruded Glass-Fiber-Reinforced Polymer-Wood Composite Profile

Analysis of transverse compressive performance of pultruded glass fibre reinforced polymer

Comparison of the mechanical properties of chopped glass, carbon, and aramid fiber reinforced polypropylene

Effects of Inorganic Fillers on the Flame‐retardant and Mechanical Properties of Rigid Polyurethane Foams

COMPRESSION MOLDING OF POWDER IMPREGNATING LONG GLASS FIBER REINFORCED POLYPROPYLENE

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

Hybrid reinforced effect of long carbon fiber and short glass fiber on polycarbonate foams