Abstract:In the past few years, fiber optic sensing technologies have played an increasingly important role in the health monitoring of civil infrastructures. These innovative sensing technologies have recently been successfully applied to the performance monitoring of a series of geotechnical structures. Fiber optic sensors have shown many unique advantages in comparison with conventional sensors, including immunity to electrical noise, higher precision and improved durability and embedding capabilities; fiber optic sensors are also smaller in size and lighter in weight. In order to explore the mechanism of seepage-induced slope instability, a small-scale 1 g model test of the soil slope has been performed in the laboratory. During the model's construction, specially fabricated sensing fibers containing nine fiber Bragg grating (FBG) strain sensors connected in a series were horizontally and vertically embedded into the soil mass. The surcharge load was applied on the slope crest, and the groundwater level inside of the slope was subsequently varied using two water chambers installed besides the slope model. The fiber optic sensing data of the vertical and horizontal strains within the slope model were automatically recorded by an FBG interrogator and a computer during the test. The test results are presented and interpreted in detail. It is found that the gradually accumulated deformation of the slope model subjected to seepage can be accurately captured by the quasi-distributed FBG strain sensors. The test results also demonstrate that the slope stability is significantly affected by ground water seepage, which fits well with the results that were calculated using finite element and limit equilibrium methods. The relationship between the strain measurements and the safety factors is further analyzed, together with a discussion on the residual strains. The performance evaluation of a soil slope using fiber optic strain sensors is proved to be a potentially effective approach.

ANALYSIS ON THE STRAIN-FIELD OF SOIL CUT SLOPE BASED ON DFOS TECHNOLOGY MONITORING

Soil Strain-Field and Stability Analysis of Cut Slope Based on Optical Fiber Measurement

PHYSICAL MODEL TESTING OF SLOPE STABILITY BASED ON DISTRIBUTED FIBER-OPTIC STRAIN SENSING TECHNOLOGY

Application of fully distributed strain sensing technology in a slope model test

Distributed Fiber Optic Monitoring and Stability Analysis of a Model Slope under Surcharge Loading

Analysis of the strain process of soil slope model during infiltration using BOTDA

Laboratory studies on slope stability monitoring using distributed fiber-optic sensing technologies

APPLICATION OF OPTICAL FIBER SENSING TECHNOLOGY TO SLOPE MODEL TEST

Numerical and Experimental Investigation of Slope Deformation under Stepped Excavation Equipped with Fiber Optic Sensors

Feasibility Study of Strain Based Stability Evaluation of Locally Loaded Slopes: Insights from Physical and Numerical Modeling

Fiber Bragg Grating-Based Performance Monitoring of A Slope Model Subjected to Seepage

Investigation of the evolutionary process of a reinforced model slope using a fiber-optic monitoring network

MODEL TEST OF SOIL SLOPE STABILITY WITH DISTRIBUTED OPTICAL FIBER SENSING TECHNOLOGY

DFOS Technology-Based Landslide Monitoring: The Majiagou Landslide Case Study (China)

Strain integration-based soil shear displacement measurement using high-resolution strain sensing technology

BOTDR Monitoring Analysis of Anti-Sliding Pile Internal Force

Slope Stability Analysis Based on Measured Strains along Soil Nails Using FBG Sensing Technology

OFDR Sensing Technology Based Distributed Monitoring and Stability Analysis of Geogrid-Reinforced-Slope

Development of fiber optic monitoring-based visualization system for strain fields of slopes

Fiber Optic Monitoring of an Anti-Slide Pile in a Retrogressive Landslide

Discrete element numerical simulation of cable-soil deformation compatibility in borehole distributed optical fiber monitoring