Modeling of Cracking and Caving of Horizontal Strata Induced by the Excavation of a Single Stratum in Long-wall Mining——Based on a Continuum-discontinuum Method

Xuebin WANG,Xiang GUO,Weinan LU,Dalei QI

DOI: https://doi.org/10.13409/j.cnki.jdpme.2018.01.001

2018-01-01

Abstract:A continuum-discontinuum method is proposed to model a series of complex mechanical behaviors of quasi-brittle materials (rocks,concretes,etc.),such as deformation,cracking,contact,friction and rotation.The method benefits from the Lagrange element method,the discrete element method and the fictitious crack model.Compared with the continuum method,the proposed method can model true cracking phenomena without remeshing.Compared with the discontinuum method,the proposed method can well treat the continuum medium before cracking.A numerical study is conducted to model the cracking and caving of horizontal strata induced by the excavation of a single stratum in long-wall mining.Results show that as the work face advances,the bed separation and cracking continuously occur in the roof.Rock blocks also continuously cave,and the region with lower vertical stresses in the roof is trapezoidal,whose size increases gradually until reaching a stable value.At two lateral sides and the top of the trapezoid,obvious cracks are observed;at other positions of the trapezoid,cracks are compacted.At two lateral sides of the trapezoid,rock blocks are obliquely arranged in the form of masonry structures.If the size of the ore body in an excavation and the number of timesteps between two adjacent excavations are increased,the caving of the roof arrives later,and the trapezoid tends to be more symmetric.These differences are related to the dependence on the loading/unloading history for a non-liner dynamic system.It has to be noted that shear fractures and the effects of hydraulic supports have not been considered in the present simulation.