Abstract:The formation of water-conducting fractures in overlying strata caused by underground coal mining not only leads to roof water inrush disasters, but also water-conducting fractures penetrate the aquifer, resulting in the occurrence of a mine-water-inrush disaster and the loss of water resources. It destroys the sustainability of surface water and underground aquifers. This phenomenon is particularly significant in extra-thick coal seams and fault-bearing areas. Numerical simulation is an effective method to predict the failure range of mining overburden rock with low cost and high efficiency. The key to its accuracy lies in a reasonable constitutive model and simulation program. In this study, considering that the three parts of penetrating cracks, non-penetrating cracks, and intact rock blocks are often formed after rock failure, the contact state criterion and shear friction relationship of discrete rock blocks and the mixed fracture displacement–damage–load relationship are established, respectively. Combined with the Mohr–Coulomb criterion, the constitutive model of mining rock mass deformation–discrete block motion and interaction is formed. On this basis, according to the engineering geological conditions of Yushupo Coal Mine, a numerical model for the development of water-conducting cracks in the roof with faults under repeated mining of extra-thick coal seams is established. The results show the following: The constitutive relation of the continuous deformation–discrete block interaction of overlying strata and the corresponding finite element–discrete element FDEM numerical program and VUSDFLD multi-coal seam continuous mining subroutine can numerically realize the formation process of faults and water flowing fractures in overlying strata under continuous mining of extra-thick multi-coal seams. The toughness of sand mudstone is low, and the fracture will be further developed under the repeated disturbance of multi-thick coal seam mining. Finally, it is stabilized at 216–226 m, and the ratio of fracture height to mining thickness is 14.1. When the working face advances to the fault, the stress concentration occurs in the fault and its overlying rock, which leads to the local fracture of the roof rock mass and the formation of cracks. The fault group makes this phenomenon more obvious. The results have been preliminarily applied and tested in Ningwu mining area, which provides theoretical support for further development of roof water disaster control under the condition of an extra-thick coal seam and avoids the loss of water resources in surface water and underground aquifers.

A novel numerical modeling method for studying the failure mechanism of the main roof with different thicknesses in longwall coal seam mining

Numerical simulation of a failure pattern of the roof in coal seam working face

Physical and numerical investigations of bedding adhesion strength on stratified rock roof fracture with longwall coal mining

Finite–Discrete Element Method Prediction of Advanced Fractures in Extra-Thick Coal Seams Based on a Constitutive Model of Rock Deformation–Fragmentation Failure Process

Finite–Discrete Element Method Simulation Study on Development of Water-Conducting Fractures in Fault-Bearing Roof under Repeated Mining of Extra-Thick Coal Seams

Fracture criterion of basic roof deformation in fully mechanized mining with large dip angle

Roof movement and instability fracture characteristics in shallow-buried thin coal seam conventional mining faces

Study on Initial Fracture Characteristics of the Main Roof in Fully Mechanized Caving Mining of Inclined Coalbed

Analysis on fracture mechanics theory of roof cutting instability mechanism with large mining height face in shallow coal seam

Study on the Spatiotemporal Dynamic Evolution Law of a Deep Thick Hard Roof and Coal Seam

Numerical Study of the Mechanism of Dense Drillings for Weakening Hard Roofs and its Application in Roof Cutting

Characteristics Analysis of Roof Overburden Fracture in Thick Coal Seam in Deep Mining and Engineering Application of Super High Water Material in Backfill Mining

Failure mechanism and 3D physical modeling test of coal face pyramid sliding in steeply inclined working face: A case study

Failure analysis and prediction of roof instability in end face under repeated mining using early warning system

Study on the controller factors associated with roof falling and ribs spalling in deep mine with great mining height and compound roof

Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam

Fracture Mechanics Model of Fully Mechanized Top Coal Caving of Shallow Coal Seams and Its Application

Failure characteristics and fracture mechanism of overburden rock induced by mining: A case study in China

Theoretical determination method and field verification of the fracture position of the main roof of the gob-side coal-rock roadway in gently inclined coal seam

Investigation on the Influence of Abutment Pressure on the Stability of Rock Bolt Reinforced Roof Strata Through Physical and Numerical Modeling

Evaluation of the face advance rate on ground control in the open face area associated with mining operations in Western China