Abstract:In view of the occurrence conditions of inclined coalbed, the deformation and failure characteristics of the main roof will affect the safe production of the working face. Therefore, the study of the deformation and failure characteristics of the main roof in the inclined coalbed has guiding significance for the control of surrounding rock. This paper takes the II1042 working face of Taoyuan Coal Mine as the research background, adopts the methods of theoretical analysis, numerical calculation, and field practice to analyze the evolutionary characteristics of the initial failure of the main roof of the working face under the background of the inclined coalbed, and explores the mechanical behavior characteristics of the working face roof during the mining of inclined coalbed. Based on the elastic thin plate theory, a mechanical model of the overlying rock roof of a large-angle coal seam is established, and the mechanical characteristics of the surrounding rock under the initial failure of the main roof under the unbalanced load are studied. The stress distribution characteristics of the lower surface are summarized, and the evolution law of the initial fracture of the main roof is summarized. According to the actual geological conditions of the II1042 working face of Taoyuan Coal Mine, the failure characteristics of the main roof and the initial breaking step distance are obtained by analysis, and the analysis results are verified by monitoring the mine pressure of each part of the target working face on site. The research results show that: 1 Under the unbalanced load of the inclined coalbed, the deflection surface of the main roof of the coal seam is asymmetrical with respect to the arrangement direction of the working face, and the maximum deflection point is located at the upper middle position of the working face, namely (a/2, 1.836 b/π), and the main roof of the working face breaks for the first time when it advances to 35 m. 2 With the advancement of the working face, the two long sides of the roof break first. With the deflection and deformation of the roof, the tensile stress in the middle of the main roof reaches the tensile strength of the rock and breaks, and then the two short sides of the roof break under the action of the breaking and turning of the rock, and the upper short side will break before the lower one. 3 According to the monitoring and analysis of the rock pressure at each part of the working face, it is judged that the initial pressure step distance is between 28.2 m and 34.6 m, which is consistent with the theoretical analysis results.

Theoretical determination method and field verification of the fracture position of the main roof of the gob-side coal-rock roadway in gently inclined coal seam

A study on the reasonable width of narrow coal pillars in the section of hard primary roof hewing along the air excavation roadway

The Stability Factors’ Sensitivity Analysis of Key Rock B and Its Engineering Application of Gob-Side Entry Driving in Fully-Mechanized Caving Faces

Fracture evolution of the main roof in gob-side entry retaining by roof cutting of an inclined coal seam

Geomechanical Model Test Investigation of Roof Cutting and Roadway Maintenance Technology Under Fault Structures

A novel numerical modeling method for studying the failure mechanism of the main roof with different thicknesses in longwall coal seam mining

Study on Initial Fracture Characteristics of the Main Roof in Fully Mechanized Caving Mining of Inclined Coalbed

Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam

Research on the Stability Mechanism of the Surrounding Rock of Gob-Side Entry Retaining by Roof Cutting in Dianping Coal Mine

Study on small coal pillar in gob-side entry driving and control technology of the surrounding rock in a high-stress roadway

Research on Surrounding Rock Deformation and Mining Field Stress Distribution during Gob‐Side Entry Retaining by Roof Cutting and Pressure Releasing in the Inclined Thick Coal Seam

Study on Time-Dependent Failure Mechanisms and CBAG Differential Support Technology of Roadway in Steeply Inclined Coal Seam

Fracture criterion of basic roof deformation in fully mechanized mining with large dip angle

Characteristic and Mechanism of Roof Fracture Ahead of the Face in an LTCC Panel When Passing an Abandoned Roadway: A Case Study from the Shenghua Coal Mine, China

Research on roof damage mechanism and control technology of gob-side entry retaining under close distance gob

Numerical Investigation of the Influence of Roof-Cutting Parameters on the Stability of Top Coal Gob-Side Entry Retaining by Roof Pre-Fracturing in Ultra-Thick Coal Seam

Research on the Movement Law of Roof Structure in Large-Inclined Coal Seam Working Face: A Case Study in Liu.Pan.Shui. Mining Area

Physical simulation and theoretical evolution for ground fissures triggered by underground coal mining

Effect of the roof cutting technique on the overlying geotechnical structure in coal mining

Deformation mechanism and control technology of gob-side entry retaining with roadside backfilling: a numerical analysis and field investigation

Study on stress distribution law of surrounding rock of roadway under the goaf and mechanism of pressure relief and impact reduction