Seismic analysis method of RC frame structure considering the excitations of twice earthquakes

Yunxia DU,Maosheng GONG,Lili XIE

2017-01-01

Abstract:To obtain the seismic capacity of reinforced concrete (RC) frame structure under the excitations of twice earthquakes,this paper presents a structural analysis method considering twice earthquake actions.Firstly,the dynamic time history analysis is adopted,and the top displacement of a structure under the first earthquake was got as the target displacement.Then,the structure was reciprocally loaded to the target displacement and unloaded to zero by the static loading method;and the reverse loading was conducted to the structural capacity limit (i.e.,the maximum displacement of the structure when the structure collapses).The reverse loading curve was used as the capacity curve of the structure after an earthquake through coordinate transformation,and the pushover analysis of structure was performed.Finally,the damage state and seismic capacity of the structure under the excitations of twice earthquakes were obtained.By using the proposed method,the seismic capacity and damage state of a typical 3-story RC frame structure are obtained.The results show that the damage accumulation effect of RC frame structure is obvious under continuous twice earthquakes,and the damage level is increased compared with the single earthquake action,and the damage level increases about 30％ for the structure used in this paper.Therefore,the design theory about the single earthquake action is not complete.It is suggested that the seismic fortification level of structure should be increased in the design.The method,result and conclusion of this paper can be used as reference for the seismic design and seismic analysis of structures.