Static Behavior of Steel Catenary Riser Considering Seabed Contact

Xiang CHEN,Xiaomei WANG,Yun GAO,Bei CHANG,Junlin CHENG

DOI: https://doi.org/10.3969/j.issn.1001-4500.2017.05.013

2017-01-01

Abstract:Based on the structural characteristics of the Steel Catenary Riser(SCR) considering seabed contact,a linear truncation model considering pipe-soil separation are used to describe p-y curves.The displacement response and equivalent stress of the riser are analyzed by changing the riser diameter,the riser wall thickness,the pipe fluid medium and the current velocity.The horizontal displacement at the top of the riser is used to simulate the horizontal drift of the upper body.The results indicate that the vertical displacement response is a downward trend with the increase of wall thickness and internal fluid density,and with the increase of current velocity,the vertical displacement response is a rising trend.The influence of the outside diameter on the displacement response of the riser tube is not significant.The equivalent stress has changed dramatically on touch down point.From touch down point to hang off point,equivalent stress of riser is the oscillation waveform peak and the peak value is a upward trend,and the distance between wave crests increases gradually.It is concluded that the displacement response of the riser is mainly affected by the wall thickness of the riser,the internal fluid density,and the current flow velocity.The equivalent stress of the riser is mainly affected by the internal fluid density and the current flow velocity.