Abstract:Multi-directional cyclic loads, as often experienced by piles supporting offshore wind turbines (OWTs), could reduce global soil-pile stiffness, and jeopardize the serviceability of OWTs. Most of the existing p-y models focus on uni-directional soil-pile interaction, with a few multi-directional models developed at the cost of additional parameters that require unusual tests for multi-directional cycling. This study presents a multi-directional bounding-surface based cyclic model for lateral soil-pile interaction in both sand and clay. It can model multi-directional cyclic hysteresis and shakedown using only six parameters, without requiring extra parameters and tests for multi-directional cycling. This is achieved by introducing several uni-directionally loaded springs around the pile at each depth. The cyclic p-y relation for multi-directional loading is derived from that for uni-directional loading, by solving equations on equality of work required for the two models under a given displacement increment. The proposed model is validated against experimental results on piles under uni- and multi-directional cycling with various load- and displacement-controlled paths. It is found that following change of loading direction, the pile displacement accumulation is not only limited to the new loading direction, but includes transverse cycling towards the direction of least soil stiffness softened by the recent loading directions. The transverse cycling causes an additional reduction in the global soil-pile stiffness, facilitating the accumulation of lateral pile displacement.

Bearing Capacities of Positioning Pile Under Lateral Loads Based on Pile-Soil Interaction

Lateral dynamic response of a partially embedded pile subjected to combined loads in saturated soil

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Analysis method for pile groups subjected to lateral and torsional loads

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

Lateral Dynamic Responses of Coastal Group Piles Considering Pile‒water‒soil Interactions

Analysis Of Deformation And Internal Force For Single Pile Under Combined Vertical And Lateral Loads Considering Yielding Of Soil

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

A Multi-Axial Bounding Surface P-Y Model with Application in Analyzing Pile Responses under Multi-Directional Lateral Cycling

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Elastic Solutions for Partially Embedded Single Piles Subjected to Simultaneous Axial and Lateral Loading

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Vertical Bearing Capacity of Large-Diameter Bored Pile

Analysis of Soil Movement Around a Loaded Pile Induced by Deep Excavation

Analytical Approach to Axially Loaded Concrete Core-Cement Soil Composite Pile

Numerical Analysis of the Laterally Loaded Pile Considering the Unlinear Characteristic of Pile-Soil Interface

Dynamic characteristics of a large-diameter pile in saturated soil and its application