Abstract:The impacting and rebounding behaviors of straight elastic components are investigated and a unified approach is proposed to analytically predict the whole process of the collision and rebounding of straight elastic bars and beams after each of them impinges on ideal (massless) elastic spring(s). The mathematical problems with definitive solution are formulated, respectively, for both the constrained-motion and free-motion stages, and the method of mode superposition, which is concise and straightforward especially for long-time interaction and multiple collision cases, is successfully utilized by repeatedly altering boundary and initial conditions for these successive stages. These two stages happen alternatively and the collision process terminates when the constrained motion no longer occurs. In particular, three examples are investigated in detail; they are: a straight bar impinges on an ideal elastic spring along its axis, a straight beam vertically impinges on an ideal elastic spring at the beam's midpoint, and a straight beam vertically impinges on two ideal springs with the same stiffness at the beam's two ends. Numerical results show that the coefficient of restitution (COR) and the nondimensional rebounding time (NRT) only depend on the stiffness ratio between the ideal spring(s) and the elastic bar/beam. Collision happens only once for the straight bar impinging on spring, while multiple collisions occur for the straight beam impinging on springs in the cases with large stiffness ratio. Once multiple collisions occur, COR undergoes complicated fluctuation with the increase of stiffness ratio. Approximate analytical solutions (AASs) for COR and NRT under the cases of small stiffness ratio are all derived. Finally, to validate the proposed approach in practical collision problems, the influence of the springs' mass on the collision behavior is demonstrated through numerical simulation.

Value of Penalty Factor During Simulation Stress Wave

Dynamic Behavior of Elastic Bars and Beams Impinging on Ideal Springs

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

Numerical Simulation on Failure Process of Prestressed Concrete Structures under Impact Load

Numerical Simulation Study on the Inertia-sensitiveness of Energy-absorbing Structures under Impact Loading

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Simulation of impact load on ship-platform collision

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Numerical simulation of cracking of early-age concrete three-point beams

Numerical Simulation of Stress Intensity Factor under Multiaxial Loading

Research of optimization for crack propagation method

Determining the Impact Behavior of Concrete Beams Through Experimental Testing and Meso-Scale Simulation: II. Particle Element Simulation and Comparison

The numerical simulation of shot peening process with an equivalent static loading method

NUMERICAL ANALYSIS OF EFFECT OF STRESS IMPULSE ON TESTING RESULT FOR CCCD-SHPB DYNAMIC FRACTURE TEST SYSTEM

A simulation modeling methodology considering random multiple shots for shot peening process

Numerical Simulation on the Influence of Projectile Shape on Loading Waveform in SHPB Tests of Rocks

A method of reverse and revision of material mechanics performance parameters for vehicle collision simulation

ERROR ANALYSIS OF STRESS INTENSITY FACTOR

Computation of Plane Crack Stress Intensity Factors Using Trigonometric Wavelet Finite Element Method