Abstract:Concrete filled double-steel-plate composite walls with shear studs, one type of steel–concrete–steel walls, are recently developed and have been used in high-rise buildings, for which fire safety is a big concern. In order to investigate the fire endurance of this new type of concrete filled double-steel-plate composite walls, three specimens with different axial compression ratios and different lengths and intervals of shear studs were tested under one-side ISO-834 standard fire to obtain the temperature distribution, deformation, and detailed failure modes. Each specimen consisted of a concrete filled double-steel-plate composite wall-body and two boundary columns. Moreover, finite-element-based numerical investigations were conducted to confirm and extend experimental findings. All the concrete filled double-steel-plate composite walls failed in compression–flexure mode with the local buckling at the compressive steel plate. The results indicate that the fire endurance of concrete filled double-steel-plate composite walls is significantly affected by the axial compression ratio, the eccentricity of the axial load, and the bond strength between shear studs and concrete. Axial compression ratio, defined as the ratio of axial compression to the nominal compressive capacity of concrete filled double-steel-plate composite walls, has both positive and negative effects on the fire endurance of concrete filled double-steel-plate composite walls. The axial load eccentricity toward the unexposed side is much more detrimental to the fire endurance of concrete filled double-steel-plate composite walls than the one toward the exposed side. In engineering practice, it is recommended that proper intervals (not greater than 300 mm) and lengths (not less than 40 mm) of the shear studs should be used to ensure the bond between concrete and steel plates.

Development Advances of the Research on Fire-Resistance of Steel-Concrete Composite Structures

FIRE RESISTANCE DESIGN OF STEEL-CONCRETE COMPOSITE STRUCTURES

Fire Behavior and Performance of Concrete-Filled Steel Tubular Columns: Review and Discussion

Advances in Study on Fire Resistance of Steel Structures

Fire Resistance and Bending Bearing Capacity of Fire-Resistant Steel-Concrete Composite Beams

Experimental Study on Fire Resistance Performance of Concrete-Filled Steel Plate Composite Walls

Behavior of Steel-Concrete Composite Slabs Subjected to Standard Fire

State-of-the-art Review on Steel-Concrete Composite Walls

Research on Mechanical Behavior of the Steel-Concrete-Steel Composite Structures Subjected to High Temperature of Fire

Development of the Research on Fire-Resistance of Structures

A review on long‐term behaviour of steel‐concrete composite structures

Fire?resistance performance of simply supported fire?resistant steel?concrete composite beams

Structure Behavior of Concrete Filled Double-Steel-plate Composite Walls under Fire

Performance of Concrete-Filled Steel Tubular Column-Wall Structure Subjected to ISO-834 Standard Fire: Analytical Behaviour

Preliminary Research On Fire Resistance Of Concrete-Filled Steel Tubular Columns To Composte Beam Frame

Experimental investigation on fire resistance of high-strength concrete encased steel composite columns

Fire Performance of Steel Reinforced Concrete (SRC) Structures

Fire performance of composite columns made of high strength steel and concrete

Preliminary Research on Mechanical Behavior of Composite Frame with Concrete-filled Steel Tubular Columns after Exposure to Overall Stage of Fire

Fire Performance and Design Method of Concrete- Filled Steel Rectangular Hollow Section Columns

Fire-resistant experimental study on fire and corrosion resistant steel-concrete composite beams