Abstract:Phase shift laser range finder, as a large-scale, high-precision measurement method, is widely used in industrial and military fields. The traditional laser range finder can not meet the need of real-time, high resolution measurement because of its low anti-jamming capability and time-consuming measurement. Owing to this, multi-channel transmitting and receiving system for phase shift laser range finder based on parallel DSP was designed. Multi-frequency modulation laser can be transmitted and received at the same time, improving the measurement speed and avoiding the wrong data fusion because of target moving. The distance was got by measuring the phase difference between the measurement signal and reference signal, and the Doppler velocity of the target is got by measuring the measurement signals frequency, The measurement signals reference signals were acquired by parallel AD convertors, the phase difference between them was calculated adopting all-phase FFT(apFFT). A new frequency correction method was proposed according to the amplitude spectrum acquired by apFFT, Amplitude spectrum is expanded into Taylor series and the correction value of frequency is calculated by relationship of spectrum lines. Monte Carlo simulation results proved that the new frequency correction method had higher resolution and better stability than Rife method and centro-baric method. The experiments is implemented on a precision guide of 3m-long, on the condition that the sampling frequency of AD converter is 937.5KHz, the apFFT transform point number is 4096, distance and velocity results can be obtained each 10ms, experiments prove that the distance measurement standard deviation better than 0.09mm and the velocity measurement standard deviation better than 0.022m/s are obtained. The system can meet the need of high accuracy ,real-time distance measurement of moving target.

High Precision Time Interval Measurement Method of Detecting LSS-UAV

A High-Precision Laser Displacement Measurement System

Design and implementation of embedded signal processing system based on pulsed laser ranging technology

Research on detecting and locating technology of LSS-UAV

High Precision Time Interval Measurement Method Applied to Laser Radar

Integrated Method for Measuring Distance and Time Difference Between Small Satellites

Method to precisely measure arrival time of ultrasonic

A High-Precision Time Interval Measurement Method Using Phase-Estimation Algorithm.

A High-Resolution Ultrasonic Ranging System Using Laser Sensing and a Cross-Correlation Method

Target-distance and intensity information detecting with high precision in laser imaging system

A Novel Method with Ps Accuracy for Time Interval Measurement

Research on laser ranging system based on time delay estimation

High-precision Pulsed Laser Measuring Distance by Time Delay Method

A High-Precision Detection Method for Laser Time Transfer Based on a Single-Photon Avalanche Detector Array

Single-photon Ranging with Hundred-Micron Accuracy

A Novel Time Extension Method of the Pulse Laser Ranging System

Improvement of Underwater Laser Ranging Accuracy Based on Wavelet Time-Frequency Analysis

Research on Real-Time Laser Range Finding System

Ultraprecision intersatellite laser interferometry

An 8-Ch LIDAR Receiver Based on TDC with Multi-Interval Detection and Real-Time $in~situ$ Calibration

Measurement of Double-Address Sonar Signal Transmission Time Based on GPS Time Synchronization Technology