Abstract:The pseudocapacitive materials, like spinel NiCo2O4 (NCO), that use Faradaic reactions to store charge have been widespread paid attention for supercapacitors application. So, it is a basic fundamental guideline that the preparation of higher-performance pseudocapacitive materials depends on achieving and accelerating more Faradaic reactions in the aspect of electrodes. In this work, based on the mentioned principle, we report a facile method that could significantly promote the capacity of NiCo2O4 nanoelectrode through annealing precursor nanowires (NWs) in different volume ratios of N-2 and O-2 condition. The pristine NCO (V-N2: V-O2 = 0: 1) only exhibited inferior performance with a specific capacitance of 0.88 F cm(-2) (338.5 F g(-1) at 2mA cm(-2)) and capacitive retention of 54% from 2 to 30mA cm(-2). While, for a comparison, the highest comprehensive performance of NCO-9 (V-N2: V-O2 = 9: 1) electrodes delivered superior specific capacitance of 3.8 F cm(-2) (1461 F g(-1) at 2mA cm(-2)), excellent rate retention of 77% and good cycling stability. These boosted pseudocapacitive properties both in capacity and rate capability are attributed to the severe oxygen vacancy defects introduced in nitrided NCO NWs. The involving richness-enabled oxygen defects significantly enhance the electron/ions transportation, and then efficiently alter the well-known capacitive surfacial reaction into bulk pattern in the charge-discharge cycles. This dramatically increased electron/ions kinetics and electrochemical cites for Faradaic reactions. These results provide a deep insight into correlating oxygen vacancies induced structural and chemical evolution on enhanced capacitive performances of redox-active-NiCo2O4 materials. (C) 2018 Elsevier Ltd. All rights reserved.

Fabrication of porous nickel oxide films and their pseudocapacitive performance

Fabrication of porous nickel-based composite film electrodes and their electrochemical capacitance performance

Electrochemical fabrication and pseudocapacitive performance of a porous nanostructured nickel-based complex film electrode

Electrochemical Fabrication of a Porous Nanostructured Nickel Hydroxide Film Electrode with Superior Pseudocapacitive Performance

One-Pot Synthesis Of Porous Nickel Cobalt Sulphides: Tuning The Composition For Superior Pseudocapacitance

Fabrication and electrochemical performance of porous nickel-based hybrid electrodes from anodized etched aluminum

Hierarchically porous NiO film grown by chemical bath deposition via a colloidal crystal template as an electrochemical pseudocapacitor material

One-Pot Fabrication Of Layered Alpha-Phase Nickel-Cobalt Hydroxides As Advanced Electrode Materials For Pseudocapacitors

Self-Assembled Synthesis of Hierarchically Porous Nio Film and Its Application for Electrochemical Capacitors

Efficient Utilization of Oxygen-Vacancies-enabled NiCo2O4 Electrode for High-Performance Asymmetric Supercapacitor

Fabrication of nanoporous NiO@CoO composites by dealloying method as ultra-high capacitance electrodes

Electrochemical Fabrication of Ni(OH)2/Ni 3D Porous Composite Films As Integrated Capacitive Electrodes

Modulating vacancies in nonstoichiometric oxides by annealing polarized nanoporous NiCoMn as thick pseudocapacitive electrode

Facile morphology controlled synthesis of nanostructured Co3O4 films on nickel foam and their pseudocapacitive performance

Anodic Electrodeposition Of A Porous Nickel Oxide-Hydroxide Film On Passivated Nickel Foam For Supercapacitors

O-Vacancy-enriched NiO hexagonal platelets fabricated on Ni foam as a self-supported electrode for extraordinary pseudocapacitance

Increased Capacitance of Porous Co0.5Ni0.5Fe2O4 for Supercapacitor Application

Fabrication of large-scale nanoporous nickel with a tunable pore size for energy storage

Porous NiO/Ag Composite Film for Electrochemical Capacitor Application

Comparative studies of nickel oxide films on different substrates for electrochemical supercapacitors

Direct synthesis of porous NiO nanowall arrays on conductive substrates for supercapacitor application