Abstract:Although Ni(OH)2 is a promising electrode material for electrochemical capacitors on account of its high theoretical specific capacitance and low cost, its application has been hindered by the low measured specific capacitance and poor cycle stability often associated with low specific surface area and poor electrical conductivity. This study aims to develop an amorphous-precursor method to anchor Ni(OH)2 nanocrystals onto conductive graphene sheets. We demonstrate the ability to control the composition, size, and morphology of Ni(OH)2 nanocrystals on graphene sheets by combination with an Ostwald ripening process, which has allowed investigation on how such factors influence their performance if used as pseudocapacitor electrodes. It was found that the specific capacitance increased and then decreased as the ratio of reduced graphene oxide (RGO) to Ni(OH)2 increased; the sample that contained 5.2 wt % of RGO achieved the highest specific capacitance of 1804.0 F g−1 (based on the total composite mass) and 1902.9 F g−1 (based on the mass of Ni(OH)2), close to the theoretical value of Ni(OH)2 (2082 F g−1). With a given ratio of RGO to Ni(OH)2, the specific capacitance decreased as the Ni(OH)2 nanocrystal size increased. However, the cycling performance increased as the stability of Ni(OH)2 in the nanocomposites increased; the highest was achieved for the most stable Ni(OH)2 hexagonal nanoplates on RGO. In all, with appropriate optimization of the parameters of the materials, a good pseudocapacitor performance was achieved for the Ni(OH)2/RGO hybrid system in terms of both the specific capacitance and the cycling stability.

NiO Nanoflakes Grown on Porous Graphene Frameworks As Advanced Electrochemical Pseudocapacitor Materials

Design and Synthesis of NiO Nanoflakes/graphene Nanocomposite As High Performance Electrodes of Pseudocapacitor

Ni(OH)2 Nanoplates Grown on Graphene as Advanced Electrochemical Pseudocapacitor Materials

Graphene Sheet/Porous Nio Hybrid Film For Supercapacitor Applications

Ni(OH)2 nanosheets grown on graphene-coated nickel foam for high-performance pseudocapacitors

Self-Assembled Synthesis of Hierarchically Porous Nio Film and Its Application for Electrochemical Capacitors

Facilely synthesized porous NiCo2O4 flowerlike nanostructure for high-rate supercapacitors

Hierarchically porous NiO film grown by chemical bath deposition via a colloidal crystal template as an electrochemical pseudocapacitor material

Hierarchical Configuration of NiCo2S4 Nanotube@Ni–Mn Layered Double Hydroxide Arrays/Three-Dimensional Graphene Sponge As Electrode Materials for High-Capacitance Supercapacitors

Fabrication and Electrochemical Performances of Hierarchical Porous Ni(Oh)(2) Nanoflakes Anchored on Graphene Sheets

Electrochemical Fabrication of a Porous Nanostructured Nickel Hydroxide Film Electrode with Superior Pseudocapacitive Performance

3D porous graphene/NiCo2O4 hybrid film as an advanced electrode for supercapacitors

A Nickel Hydroxide-Coated 3D Porous Graphene Hollow Sphere Framework As a High Performance Electrode Material for Supercapacitors

Electrochemical fabrication and pseudocapacitive performance of a porous nanostructured nickel-based complex film electrode

Electrodeposited Ni(OH)2 Nanoflakes on Graphite Nanosheets Prepared by Plasma-Enhanced Chemical Vapor Deposition for Supercapacitor Electrode

3D nitrogen-doped graphene/Co(OH)2-nanoplate composites for high-performance electrochemical pseudocapacitors

Ni-MOF Derived NiO/C Nanospheres Grown in Situ on Reduced Graphene Oxide Towards High Performance Hybrid Supercapacitor

High-Performance Three-Dimensional Nanoporous Nio Film As A Supercapacitor Electrode

Nanocomposites of Ni(Oh)2/Reduced Graphene Oxides with Controllable Composition, Size, and Morphology: Performance Variations As Pseudocapacitor Electrodes

Hetero-structure Arrays of NiCoO2 Nanoflakes@nanowires on 3D Graphene/nickel Foam for High-Performance Supercapacitors

Ultrathin Mesoporous Nio Nanosheet-Anchored 3d Nickel Foam As An Advanced Electrode For Supercapacitors