Impurity profile study and HPLC method development for related substances determination of leuprorelin acetate

Li-jia ZHAO,Jiong YU,Hui-di JIANG

DOI: https://doi.org/10.16155/j.0254-1793.2017.08.10

2017-01-01

Abstract:Objective:To study the impurity profile of leuprorelin acetate and develop an HPLC method for the determination of related substances.Methods:The analysis was conducted on a full coverage chemically bonded silica column [Sepax GP-C18 column (150 mm × 4.6 mm,3 μm)] with a mobile phase of triethylamine buffer,n-propyl alcohol and acetonitrile mixed solution by isocratic at the flow rate of 0.9 mL· min-1 for 90 min.The column temperature was 35 ℃,the detection wavelength was 220 nm and the injection volume was 20 μL.Results:The known impurities and degraded products by forced degradation were completely separated from leuprorelin acetate.The calibration curves of impurity B (2-D-His-leuprorelin) and impurity M (deletion 4-Ser-leuprorelin) were linear in the self-concentration range of 0.001-0.02 mg· mL-1 (r2 ≥ 0.999,n=6) and the correction factors were 1.09.The average recoveries of the impurities B and M (n=9)were 96.1％ and 108.3％,respectively,and the RSDs (n=9) were 1.6％ and 3.0％,respectively.The RSDs of repeatability (n=6) for impurity B,impurity M and total impurities were 0.85％,1.9％ and 1.7％,respectively.The RSD of peak area (n=5) for all validation items was no more than 1.4％,and the RSD of retention time was no more than 0.34％.The results showed that all the impurities were less than identification limit of 0.5％ and the total impurities level was no more than 0.6％ in the three batches leuprorelin acetate.Conclusion:The established method is suitable for the determination of the related substances in leuprorelin acetate.