Abstract:Background: Physiological curvature changes of the lumbar spine and disc herniation can cause abnormal biomechanical responses of the lumbar spine. Finite element (FE) studies on special weightlifter models are limited, yet understanding stress in damaged lumbar spines is crucial for preventing and rehabilitating lumbar diseases. This study analyzes the biomechanical responses of a weightlifter with lumbar straightening and L4-L5 disc herniation during symmetric bending and lifting to optimize training and rehabilitation. Methods: Based on the weightlifter's computed tomography (CT) data, an FE lumbar spine model (L1-L5) was established. The model included normal intervertebral discs (IVDs), vertebral endplates, ligaments, and a degenerated L4-L5 disc. The bending angle was set to 45°, and weights of 15 kg, 20 kg, and 25 kg were used. The flexion moment for lifting these weights was theoretically calculated. The model was tilted at 45° in Abaqus 2021 (Dassault Systèmes Simulia Corp., Johnston, RI, USA), with L5 constrained in all six degrees of freedom. A vertical load equivalent to the weightlifter's body mass and the calculated flexion moments were applied to L1 to simulate the weightlifter's bending and lifting behavior. Biomechanical responses within the lumbar spine were then analyzed. Results: The displacement and range of motion (ROM) of the lumbar spine were similar under all three loading conditions. The flexion degree increased with the load, while extension remained unchanged. Right-side movement and bending showed minimal change, with slightly more right rotation. Stress distribution trends were similar across loads, primarily concentrated in the vertebral body, increasing with load. Maximum stress occurred at the anterior inferior margin of L5, with significant stress at the posterior joints, ligaments, and spinous processes. The posterior L5 and margins of L1 and L5 experienced high stress. The degenerated L4-L5 IVD showed stress concentration on its edges, with significant stress also on L3-L4 IVD. Stress distribution in the lumbar spine was uneven. Conclusions: Our findings highlight the impact on spinal biomechanics and suggest reducing anisotropic loading and being cautious of loaded flexion positions affecting posterior joints, IVDs, and vertebrae. This study offers valuable insights for the rehabilitation and treatment of similar patients.

Impact of Lifting Load, Speed and Posture on Force at Lumbar L5/S1 Joint of Lifting Simulation in Molding Task

Influence of the Morphology of Lumbar Motion Segment on Isthmic Stress and Facet Contact Force: A Finite Element Analysisangzh

Assessment on the Features of Physical Load in Moulding Workers

Effects of Load and Speed on Lumbar Vertebral Kinematics During Lifting Motions.

[Study on Lifting-Related Musculoskeletal Disorders among Workers in Metal Processing].

A pilot study to assess a risk of a high-risk group of low back pain membership in workers who perform the manual material handling tasks

Biomechanical Study of Symmetric Bending and Lifting Behavior in Weightlifter with Lumbar L4-L5 Disc Herniation and Physiological Straightening Using Finite Element Simulation

Estimating Compressive and Shear Forces at L5-S1: Exploring the Effects of Load Weight, Asymmetry, and Height Using Optical and Inertial Motion Capture Systems

Effect of low back pain on the kinetics and kinematics of the lumbar spine - a combined in vivo and in silico investigation

Assessing the accuracy of a wireless sensor system for estimating lumbar moments during manual lifting tasks considering the effects of load weight, asymmetry, and height

In vivo load on knee, hip and spine during manual materials handling with two lifting techniques

A Finite Element Analysis of the Biomechanics of the Lumbar Spine under Plane Force Kneading

The highs and lows of lifting loads: SPM analysis of multi-segmental spine angles in healthy adults during manual handling with increased load

Study on Static Biomechanical Model of Whole Body Based on Virtual Human

Study on Musculoskeletal Disorders in a Machinery Manufacturing Plant

The effect of lifting load on the kinematic characteristics of lumbar spinous process in vivo

Influence of muscle activation on lumbar injury under a specific +Gz load

Impact of Sex, Posture, and Phase on Back and Lower Extremity Moments and Muscle Excitation during Lifting Task: A Cross-sectional Study

The influence of lumbar extensor muscle fatigue on lumbar-pelvic coordination during weightlifting

Ergonomics Evaluation of Manual Lifting Task on Biomechanical Stress in Symmetric Posture

Quantitative Study of Biomechanical Parameters Based on Lever Positioning Manipulation on Lumbar Disc Herniation