Abstract:Concrete-filled steel tubes (CFST) are widely used in significant projects due to their high performance stemming from full utilization of combined material advantages. The interfacial bond behavior is the foundation of their high performance, but will deteriorate during the long-term service. Due to the difficulties on carrying out long-term experiments and decoupling the multi-constitutive component bond strength including chemical adhesion, micro-interlocking and friction, there is still a lack of research on long-term interface constitutive models, restricting the safe design of CFST structures throughout their full-lifecycle. Here, push-out tests were carried out on CFST specimens considering long-term effects spanning 850 days including concrete age and duration of long-term interfacial load. The steel plate-concrete specimens, reversed push-out tests and interfacial normal pressure calculation were used to decouple the components of bond stress. the CFST interface database considering long-term effects was established and the mechanism of long-term effects have been revealed. As the duration increases, the bond stress decreases at the beginning, and thereafter stabilizes where the friction component dominates. Compared to that without interfacial load, long-term interfacial load accelerates the damage to chemical adhesion and micro-interlocking at initial stage, but the difference of their effects on bond stress is not significant in the later stage. On this basis, a long-term interfacial constitutive model for its full-lifecycle safe design and a simplified numerical method for long-term effects on bond behavior have been proposed.

Analysis on Bond Strength at the Interface of Centrifuge Concrete Filled Steel Tube

Theoretical analysis on bond-slip constitutive relationship on tube and concrete interface in centrifuge concrete filled steel tubular structures

Study on the working mechanism and behavior of centrifuge concrete filled-steel tubular(CCFT) members subjected to torsion

Torsional Ultimate Bearing Capacity of Centrifugal Concrete Filled Steel Tube Based on Model of Failure Line

Experimental and theoretical analysis for centrifuge concrete filled-steel tubular members subjected to bending-torsion

Flexural strength analysis of non-post-tensioned and post-tensioned concrete-filled circular steel tubes

Mechanism of Load Introduction and Transfer Within Steel-Encased CFST Members with Shear Connections

Experimental Investigation on Influence of Embedment Length, Bar Diameter and Concrete Cover on Bond Between Reinforced Bars and Steel Fiber Reinforced Concrete (SFRC)

Bond Properties of Steel Angles in Concrete Filled Steel Tubes

Experimental study and numerical analysis of the interfacial bonding performance of T‐shaped concrete‐filled steel tubes

EQUIVALENT CONSTITUTIVE RELATIONSHIP FOR CENTRIFUGE CONCRETE-FILLED STEEL TUBULAR

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Mechanism of Load Introduction and Transfer Within Steel-Encased Concrete-Filled Steel Tube Connections

Reliability-based design on centrifuge concrete filled steel tubular members

Bending Strength of Thin-Walled Centrifugal Concrete-Filled Steel Tubes

Research on the interfacial bonding performance of novel composite L‐shaped concrete‐filled steel tubes

Studies on Constitutive Relationship for Concrete Filled Steel Tube

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Initial discussion on the bond problems of steel and concrete in Concrete Filled Steel Tubes(CFST)

Experimental Study on the Bond-Slip Behavior of Steel Tube-Coal Gangue Concrete

Long-term Effects Including Shrinkage and Interfacial Creep on Bond Behavior of Concrete-Filled Steel Tubes (CFST): Experiment and Design