Abstract:In this study, the influence of the slenderness and diameter-thickness ratio on the interfacial bonding performance of hollow steel tube and Ultra-high toughness cementitious composite (UHTCC) was analysed by conducting push-out test. The study examined the specimens' failure modes, strain distribution curves along the longitudinal direction of the steel tube, load-slip behaviour, and interfacial bonding mechanisms. A finite element model was developed and validated against experimental findings. The results indicated that neither the hollow steel tube nor the UHTCC reached their respective yield strengths during testing. The strain on the inner surface of the steel tube increased with increasing load. The interface load-slip curve revealed distinct cementation, slip, and friction phases. The stress distribution and load-slip characteristics of the steel tube simulated via finite element analysis closely match the experimental outcomes. Subsequently, considering the influence of the steel tube length and diameter, a statistical regression analysis was performed to determine the bond strength and bond failure load of the hollow steel tube and UHTCC, yielding calculation formulas correlating these parameters with the slenderness and thickness ratios. An error analysis validated the derived formulas against experimental and simulation results. Furthermore, two variables, namely the shear modulus of the bonding layer and the wall thickness of steel tubes, were introduced for the finite-element simulation under linear elastic conditions, and the changes in the related properties of the hollow steel tube and UHTCC members in response to the variation of some factors were discussed and analysed.

Experimental study and numerical analysis of the interfacial bonding performance of T‐shaped concrete‐filled steel tubes

Bond Properties of Steel Angles in Concrete Filled Steel Tubes

Research on the interfacial bonding performance of novel composite L‐shaped concrete‐filled steel tubes

Experimental Investigation on Influence of Embedment Length, Bar Diameter and Concrete Cover on Bond Between Reinforced Bars and Steel Fiber Reinforced Concrete (SFRC)

Flexural strength analysis of non-post-tensioned and post-tensioned concrete-filled circular steel tubes

Flexural behavior of concrete-filled circular steel tubes under high-strain rate impact loading

Analysis on Bond Strength at the Interface of Centrifuge Concrete Filled Steel Tube

Experimental study and design of bond behavior in concrete-filled steel tubes (CFST)

Mechanism of Load Introduction and Transfer Within Steel-Encased CFST Members with Shear Connections

Experimental study on the steel–concrete bond behaviour of circular concrete-filled stainless steel tubes

Theoretical analysis on bond-slip constitutive relationship on tube and concrete interface in centrifuge concrete filled steel tubular structures

Concrete-filled Steel Tubes with Reinforcing Bars or Angles under Axial Tension

Long-term Effects Including Shrinkage and Interfacial Creep on Bond Behavior of Concrete-Filled Steel Tubes (CFST): Experiment and Design

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Experimental Study on the Performance of Steel-Concrete Interfaces in Circular Concrete-Filled Double Skin Steel Tube

Experimental study on the interfacial bonding performance of concrete-filled steel tubes at different ambient temperatures

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Experimental and numerical investigations on the bond-slip behavior of the interface between geopolymer concrete and steel tube

Study of bond-slip push-out test of circular hollow steel tube and UHTCC

Study on Bond-Slip Behaviors of Self-Stressing Steel Slag Concrete-Filled Steel Tube

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending