Fault reactive induced by the principal stress rotation for the underground coal mining

ZHAO Yixin,LU Zhiguo,ZHU Guangpei,JIAO Zhenhua,WANG Hao,GAO Ning

DOI: https://doi.org/10.13247/j.cnki.jcumt.000794

2018-01-01

Abstract:In order to investigate the fault slip mechanism under the rotation of principle stress induced by coal excavation,the Coulomb failure stress increment was used as the fault activation criterion,and the damage factor was introduced to evaluate the degree of fault slip failure.The influences of principal stress rotation on stress distribution and fault slip along the fault plane with different dip angles were analyzed with numerical simulation method.The results show that the principal stress deflection induced by mining activities makes the shear stress increase along the fault plane,while the normal stress perpendicular to the fault is reduced by the pressure relief and stress deflection.The larger the fault angle,the more obvious the shear stress increment on the fault plane.When the footwall of reverse fault works in the direction of fault,the principal stress of the bottom plate near the fault plane is deflected first,and the principal stress deflection at the roof is lagging behind the coal seam and the bottom plate.The principal stress deflection at the roof lags behind the coal seam and floor.The damage factor of different fault dips changes with deflection angle of principal stress in an inverted "S" shape change.For the dip angle is 15°,30°,45° and 60° of fault,the Coulomb failure stress and damage factor are the smallest when the maximum principal stress is deflected to the vertical fault.When the deflection is parallel to the fault,the Coulomb failure stress and damage factor are the largest,the maximum value of the damage factor is about 8.5 to 9.2 times the minimum.