Abstract:Caving-induced fault reactivation and its effects on caving process are widely recognized as serious safety issues in mining and tunnelling industry. In this study, the effects of a variety of factors (i.e. friction coefficient, stick–slip instability, geological structure, pre-mining status, mining and its induced effects) that might exert an influence on fault dynamic behaviour of a 5-seam coal mine are investigated using practical mine-wide finite element numerical models with a normal fault. Based on the research outcomes on R-minimum-based finite element modelling of earthquake dynamics, the node-to-point contact strategy and the nonlinear friction contact law have been used here to simulate and analyse the caving-induced stick–slip frictional instability along the fault and related effects. The simulation results show that: (1) stress distribution before mining is relatively uniform around the fault for a homogenous rock material case, while stress concentration appears around the fault for the model with contrasting rock material properties; (2) the multiple-layered models are in favour of fault reactivation than models with only one material for whole strata; (3) the fault reactivation scale (i.e. dynamic relative motion and fault slip) induced by caving activity is significantly affected by rock mass strength, caving depth and its relative position to the fault. As caving progresses deeper and closer to the fault, the fault reactivation scale increases. Meanwhile, the fault in low strength strata is much more sensitive to fault slip behaviour; (4) seismic source parameters, namely seismic moment and moment magnitude, are adopted to evaluate the magnitude of caving-induced seismicity based on numerical results and fault slip risk and magnitude increase as fault reactivation scale expands; (5) during the caving stage, the failure zone initiates, develops and eventually connects the reactivated fault to the working area, presenting asymmetric failure pattern around the caving zone. The failure zone is obviously larger for the side closer to the fault than the other side due to caving-induced fault reactivation effects. This could help in better understanding fault reactivation and rock failure behaviours towards an optimised design of caving in a faulted region.

Experimental Study on the Mechanisms of Fault Reactivation and Coal Bumps Induced by Mining

Experimental research on fault reactivation and relating coal bumps

Mechanism of coal bump induced by joint slipping under static and dynamic stresses in graben structural area

Study on Overburden Rock Movement and Stress Distribution Characteristics under the Influence of a Normal Fault

Dynamic Mechanical Response and Movement Evolution Characteristics of Fault Systems in the Coal Mining Process

Caving-induced fault reactivation behaviour and its effects on mining safety with a multiple seam context

Study on Instability Fracture and Simulation of Surrounding Rock Induced by Fault Activation under Mining Influence

A numerical simulation technique to study fault activation characteristics during mining between fault bundles

Mining-induced fault failure and coseismic slip based on numerical investigation

The Mechanical Criterion of Activation and Instability of Normal Fault Induced by the Movement of Key Stratum and Its Disaster-Causing Mechanism of Rockburst in the Hanging Wall Mining

Anatomy of mining-induced fault slip and a triggered rockburst

Fault reactive induced by the principal stress rotation for the underground coal mining

Numerical Simulation of Fault Activation Pattern Induced by Coal Extraction

Analysis of Rock Burst Mechanism in Extra-Thick Coal Seam Controlled by Thrust Fault under Mining Disturbance

Simulation of the activation of mining faults and grouting reinforcement under thick loose layer and thin bedrock

Research on the Characteristics of Coal Bump and Monitoring and Early Warning in Hujiahe Coal Mine

Interaction law between mining stress and fault activation and the effect of fault dip angle in longwall working face

Study on overburden failure characteristics and displacement rule under the influence of deep faults

Investigation on fault activation–induced floor water inrush and its pressure relief control in a 1000-m depth coal mine

Research on dynamic response characteristics of normal fault footwall working face and rock burst prevention technology under the influence of the gob area

Theoretical and numerical investigations on mining-induced fault activation and groundwater outburst of coal seam floor