Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multi-Objective Optimization on the Structural Parameters of Spiral Wound Heat Exchanger

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Numerical simulation and structure optimization of spiral wound heat exchanger with novel spacing bars

Structural parameter design of welded plate heat exchanger based on multi-objective optimization algorithm

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Parametric optimization of a spiral ground heat exchanger by response surface methodology and multi-objective genetic algorithm

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Numerical study on flow and heat transfer performance of a spiral-wound heat exchanger for natural gas

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Process calculation method and optimization of the spiral-wound heat exchanger with bilateral phase change

Passage arrangement design for multi-stream plate-fin heat exchanger under multiple operating conditions

Configuration Optimization of a Shell-and-Tube Heat Exchanger with Segmental Baffles Based on Combination of NSGAII and MOPSO Embedded Grouping Cooperative Coevolution Strategy

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Optimization of Twist Winglets–Cross-Section Twist Tape in Heat Exchangers Using Machine Learning and Non-Dominated Sorting Genetic Algorithm II Technique

Numerical simulation of heat transfer performance of spiral wound heat exchanger under sloshing condition

Multi-objective optimization of helically coiled tube heat exchanger based on entropy generation theory

Multi-objective optimization of non-uniform plate heat exchanger with dimples/protrusions for heat recovery of setting machines