Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. In order to meet the requirements of high frequency, high precision, and micro-scale dispensing in the field of microelectronics packaging, a piezoelectric jetting dispensing valve based on two-stage displacement amplifying mechanism was proposed. First, the overall structure and working principle of the proposed piezoelectric jetting valve were described. The displacement amplifying mechanism was designed, and the mathematical relationship between the output displacement and the structural parameters was established. In addition, the performance and the structural size of the displacement amplifying mechanism were analyzed and optimized by using the finite element analysis software. The influences of driving pressure, glue viscosity, needle displacement, and other parameters on droplet diameter and jetting velocity in the process of dispensing were simulated and analyzed. In order to obtain the optimal nozzle structure, the changing curves of glue flowing velocity with different nozzle seal forms, nozzle cone angles, and outlet inner diameters were compared and analyzed. Finally, the prototype of the piezoelectric jetting dispensing valve was machined, and experimental study was performed. The influence laws of driving pressure, glue viscosity, driving voltage, and other parameters on the diameter of droplet were explored. The performance of the prototype was evaluated from three aspects of dispensing frequency, consistency, and minimum dispensing droplet diameter. Results show that the highest dispensing frequency is 230 Hz, the deviation of dispensing consistency is ±8.77%, and the minimum dispensing droplet diameter is 0.54 mm. The experimental results verify the high frequency, consistency, and micro-scale dispensing performance of the piezoelectric jetting dispensing valve based on the displacement amplifying mechanism, which provides a reference for the research of piezoelectric high-frequency jetting dispensing.

Optimization of a Pneumatic Valve Control Microdrop-on-demand System

Development of In-out-burst Pneumatic On/off Valve

Study on ultrahigh pressure and large flow rate pneumatic on-off valve

Experimental investigation on the performances of a valve-based and on-demand droplet generator producing droplets in a wide size range

Some Considerations for Designing a Pneumatic Micro-Droplet Generator

Homemade Pneumatic Microdrop-on-demand System and Impacts of Jetting Process on Cell Viability

Feedback Control of Ejection State of a Pneumatic Valve-controlled Micro-droplet Generator Through Machine Vision

On-demand control of microfluidic flow via capillary-tuned solenoid microvalve suction.

Experimental Study on a Solenoid Valve-Based Generator for Droplet Generation

Simulation and Experiment Study on Piezoelectric Actuated Diaphragm-driven Microdroplet Jetting

Design and Experiment of a Jetting Dispenser Driven by Piezostack Actuator

Effect of Enhanced Squeezing Needle Structure on the Jetting Performance of a Piezostack-Driven Dispenser

The Design and Evaluation of a High-Speed Jet Dispenser Driven by Single Piezoelectric Stack

Micro-droplet of Particulate Suspension Generated by a Pneumatic Ejection System

Controlling Ejection State of a Pneumatic Micro-droplet Generator Through Machine Vision Methods

Droplet Volume Modulation Based on Multi-Waveform Superposition for Drop-on-demand Material Jetting

Design and performance analysis of a piezoelectric jetting dispensing valve

Design and Implement of Pneumatic Drop-on-Demand Generator for Metal Droplet Production

Control and Jetting Characteristics of an Innovative Jet Valve with Zoom Mechanism and Opening Electromagnetic Drive

Droplet size and spray pattern characteristics of PWM-based continuously variable spray

Study on the Kinetic Characteristics of Droplet Formation in Pneumatic Microdroplet Injection