Abstract:Abstract Micro-droplet ejection is a liquid dispensing technology that has potential applications in many fields. Specifically, pneumatic ejection is actuated by a solenoid valve, which is set to ‘conduction’ state for a brief period of time Δt. High pressure gas of P 0 enters the liquid reservoir, then releases through a venting tube, creating a oscillating pressure waveform P(t), forcing the liquid out through a tiny nozzle to form a micro-droplet. For each actuation, P(t) is acquired by a high-speed pressure sensor, and the ejection state is obtained by high-speed photography and image processing methods. Some issues for the design of pneumatic micro-droplet ejector are discussed. For simulation of P(t), it is proposed within an electro-acoustic analogy picture that the acoustic resistance of the venting tube is mainly due to viscous effect and may vary with time during the whole ejection process. Based on this assumption, the calculated P(t) is more consistent with the actual measurement. Experimentally, the droplet ejection process for different length of venting tube is studied. With P 0 and Δt set, by increasing the venting tube length L, both the peak value P MAX1 and duration of the first positive pressure period increase, and more droplets are ejected from a single actuation. By setting different P 0, P MAX1 for different L is tuned to an identical and appropriate value, so that single droplet is ejected due to the first positive pressure period. However, with the increase of L, the peak value of the second positive pressure period P MAX2 increases. There is a certain probability that another droplet is ejected. It is realized that the increase of L can reduce gas consumption, but the multiple ejection is a drawback that should be considered in the design of pneumatic ejection system.

Experimental Study on a Solenoid Valve-Based Generator for Droplet Generation

Experimental investigation on the performances of a valve-based and on-demand droplet generator producing droplets in a wide size range

A Versatile Droplet on Demand Generator Based on Active Pressure Control

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

Development of In-out-burst Pneumatic On/off Valve

Design and Experimental Study on Vane-type Pulsating Flow Generator

Some Considerations for Designing a Pneumatic Micro-Droplet Generator

Optimization of a Pneumatic Valve Control Microdrop-on-demand System

Designing and Implementing an Electromagnetic Actuated Drop-on-Demand(DOD) Droplet Generator

Controllable Fission of Droplets and Bubbles by Pneumatic Valve

Droplet Generation of Microfluidic Jetting and Its Applications

Simple Method to Generate Droplets Spontaneously by a Superhydrophobic Double-Layer Split Nozzle.

Viscoelastic fluid droplet generating device with particle size capable of being controlled

Micro-droplet of Particulate Suspension Generated by a Pneumatic Ejection System

Development of A Piezoelectric-Actuated Drop-On-Demand Droplet Generator Using Adaptive Wavelet Neural Network Control Scheme

On-demand control of microfluidic flow via capillary-tuned solenoid microvalve suction.

Feedback Control of Ejection State of a Pneumatic Valve-controlled Micro-droplet Generator Through Machine Vision

A Fixed-Frequency,Single-Droplet Piezoelectric Generator for Research in Steady-State Droplet Evaporation and Combustion

Modeling and simulation of pneumatic drop-on-demand generator for droplet production

Cost-Effective Droplet Generator for Portable Bio-Applications

Controlling Ejection State of a Pneumatic Micro-droplet Generator Through Machine Vision Methods