Influence characteristics of Cu2+and Ni2+on the treatment efficiency of hydrolysis-MBR process

Likun HUANG,Guangzhi WANG,Wei LI,Fanqi QU,Jingyuan WANG,Qingliang ZHAO
DOI: https://doi.org/10.11918/j.issn.0367-6234.2017.02.011
2017-01-01
Abstract:In order to reduce the impact of heavy metals on the biological treatment system of electroplating wastewater, a lab?scale process combined with hydrolysis reactor and membrane bioreactor ( MBR) was used to treat electroplating wastewater. Taking Cu2+ and Ni2+ as research objects, the effects of different metal concentrations on the electroplating wastewater treatment were studied, and the changes of DOMs and microbial activity in water were analysed simultaneously. The experimental results showed that the removal efficiencies of COD and NH4+-N were above 75% and 45%, respectively, when the concentration of Ni2+and Cu2+ was 5-20 mg/L. Nitrification bacteria’ s ability to resist heavy metal impact was weak. The tolerance concentration of Ni2+ in hydrolysis reactor combined with MBR was 20 mg/L and only 10 mg/L in MBR. The hydrolysis reactor could convert most of HPI into HPO-A, which could improve the biodegradability of refractory organic compounds, and the content of aromatic compounds was obviously decreased. With the increase of Ni2+and Cu2+, the SOUR value of activated sludge in MBR reactor was gradually decreased, but the inhibition rate of SOUR in hydrolysis reactor combined with MBR was 5% lower than that in MBR. Due to the hydrolysis, the toxicity of heavy metals decreased. In hydrolysis reactor combined with MBR, the activity of microorganism was higher, and the content of EPS and the effluent concentration were significantly lower than those in MBR. The formation of colloid, dissolved organic matter and sludge cake layer could be reduced effectively, which retarded the rate of membrane fouling.
What problem does this paper attempt to address?