Abstract:The transformation of heavy metal forms during sewage sludge bioleaching with elemental sulfur as substrate was investigated. The sequential selective extraction procedure was an effective way to reflect the variation in heavy metal forms. The exchangeable form of Cu, Pb and Zn after bioleaching accounted for 81.6, 40.2 and 75.8%, respectively. Cu at initial sludge mainly existed as sulfide precipitate form, most of which turned to exchangeable form during bioleaching, and was solubilized mostly by direct mechanism. The original forms of Pb and Zn were mainly carbonate precipitate and organically bound. Most of the carbonate precipitate Pb transformed into exchangeable form but a little of organically bound Pb. Pb was dissolved from the sludge due to transformation of carbonate precipitated and sulfide precipitated to exchangeable form by cooperation of both direct and indirect mechanisms. A majority of exchangeable Zn was transformed from organically bound and carbonate precipitated forms, and the bioleaching mechanism of Zn was mainly indirect. After bioleaching, the sewage sludge could be applied to land more safely because the heavy metals mainly existed in stable forms. The exchangeable Cu and Pb achieved an obvious increase at pH about 2, while exchangeable Zn showed higher percentage at pH about 3. The transformation of chemical forms for Cu had good relationship with ORP during bioleaching, but Zn was not influenced by ORP of sludge, which appeared to have high bioleaching efficiency at ORP less than 200 mV.

Removal of Heavy Metals in Sewage Sludge and Losses of Nutrition During Bioleaching

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

Removal of Cr from tannery sludge by indigenous sulfur-oxidizing bacteria.

Effect of substrate on bioleaching of Cu,Zn from sewage sludge

The combination of aerobic digestion and bioleaching for heavy metal removal from excess sludge

Comparison of two different combined bioleaching-electrokinetic remediation processes

Removal behavior and chemical speciation distributions of heavy metals in sewage sludge during bioleaching and combined bioleaching/Fenton-like processes

Effect of amount of inoculum on the bioleaching of heavy metals from sewage sludge

Transformation of heavy metal forms during sewage sludge bioleaching.

Exploring Key Physicochemical Sediment Properties Influencing Bioleaching of Heavy Metals

Optimizing Conditions for Bacterial Leaching of Copper from Discarded Mines

Effects of Initial Ph on Bioleaching of Heavy Metals from Sewage Sludge

Enhancing sludge dewatering and heavy metal removal by bioleaching with Na2S2O3 as substrates

Feasibility of bioleaching of heavy metals from sediment with indigenous bacteria using agricultural sulfur soil conditioners

Electrokinetic removal and recycling of heavy metals from sewage sludge with citric acid complexation

Bacterial Leaching of Discarded Copper Ores from Yongping, China

Bioleaching of heavy metals from pig manure

Improving heavy metals removal, dewaterability and pathogen removal of waste activated sludge using enhanced chemical leaching

Bioleaching of heavy metals from sewage sludge by indigenous iron-oxidizing microorganisms using ammonium ferrous sulfate and ferrous sulfate as energy sources: a comparative study

Study on bioleaching of heavy metals in lead-zinc mine tailings by Acidithiobacillus ferrooxidans and the transformation in the speciation of heavy metals during the bioleaching

Electrokinetic Gathering and Removal of Heavy Metals from Sewage Sludge by Ethylenediamine Chelation