Abstract:This study investigates the aerodynamic noise generated and radiated from a standard squareback body with various inclined side-view mirrors using a hybrid computational aeroacoustics method based on a stress-blended eddy simulation coupled with the Ffowcs-Williams and Hawkings acoustic analogy. The results indicate that in the absence of the side-view mirror, the idealized A-pillar is identified as the subsequent major contributor to the overall noise radiated from the vehicle body, and the coefficient of drag decreases by approximately 13.3% despite a minimal change in the projected frontal area. However, the behavior of the drag coefficient becomes nonlinear and highly dependent on the complex flow features, including the vortex shedding patterns and the interaction between the flow and side surface of the body, with increasing mirror inclination angle. In contrast, the radiated noise exhibits a constant decrease as the mirror inclination angle (θ) increases to 32°. Additionally, when the side-view mirror is considered as the sole source, the noise radiated is minimal for an inclination angle of 16°, and a further increase in inclination angle has no significant reduction on the noise radiated but alters the overall drag coefficient of the vehicle. These findings have practical implications for the design of side-view mirrors to reduce aerodynamic noise in automotive applications and highlight the complex tradeoffs between noise reduction and changes in the drag coefficient that must be considered in such designs.

Numerical simulation of wind noise of a kind of SUV vehicle rear-view mirror

Numerical Simulation of Transient Flow Field and Aerodynamic Noise of The Automobile Rear View Mirror Region

Study on flow field and aerodynamic noise of electric vehicle rearview mirror

Numerical Simulation and Structure Optimization of Compressor Muffler

Application of Acoustic Transfer Vector Algorithm on Acoustic Radiation for Drive Axle of Automobile

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

A Study on Effect of Styling and Structure of an Outside Rearview Mirror on Aerodynamic Noise

Applied-Information Technology with Different Sub-Grid Models in Large Eddy Simulation

Acoustic Modelling and Analysis of Vehicle Interior Noise Based on Numerical Calculation

Comparison and Analysis on the Impact of Two Typical Rearview Mirrors on Aerodynamic Performance

Computational Aeroacoustics of a Generic Side View Mirror using Stress Blended Eddy Simulation

Evaluation and Optimization of the Aerodynamic Noise Reduction of Vehicle Side View Mirrors: Experimental and Numerical Study

Aerodynamic noise control of rearview mirror by steady and unsteady jets

Sound quality evaluation of automobile side-window buffeting noise based on large-eddy simulation

The Effect of Inner Duct on Aerodynamic Noise of an Outside Rear View Mirror

The measurement of distribution of extericr wind noise of aut omobile by acoustic mirror

Numerical simulation of the sound field inside a natural ventilation window

Investigating the aerodynamic drag and noise characteristics of a standard squareback vehicle with inclined side-view mirror configurations using a hybrid computational aeroacoustics (CAA) approach

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Aerodynamic noise prediction of passenger vehicle with hybrid detached eddy simulation/acoustic perturbation equation method

Numerical simulation of aerodynamic noise and noise reduction of range hood