Abstract:To prevent the failure of membrane structures due to excessive loads, the tearing properties of such structures with coated fabrics were investigated in this study. First, the material properties were obtained by conducting tensile, shear, and single-edge notched tests. Thereafter, a structure tearing test was designed and conducted. Test models with different cracks exhibited similar load–displacement of actuator curves, and the critical tearing loads decreased with increasing in crack sizes. However, the decreasing trend gradually declined. Different test models exhibited similar crack expansion processes before the initiation of tearing. After tearing initiated, the crack extension speed and failure mode varied. Based on the displacement results around the crack, the influence of the crack was local before tearing initiated. However, the crack size can determine the timing and mode of the failure of membrane structures. Furthermore, by comparing the tearing test results at the structure and material levels, the crack size and critical tearing strength per unit length were verified as critical parameters for determining a relatively complete tearing mechanism. Finally, due to the differences between the structure tearing and single-edge notched tests, a stress analysis was conducted to confirm the detailed margins/limitations based on a numerical simulation. The critical tearing strength at the crack section was obtained, and the theoretical critical tearing loads were obtained based on the modified stress field model. The results related to the single-edge notched test were smaller, and can therefore provide a relatively safe estimation with respect to the membrane structure tearing test. This study was preliminary, and can serve as a basis for investigating the tearing of membrane structures.

Tearing propagation of stratospheric airship envelope based on the link model

Progressive failure analysis of 2D woven composites at the meso-micro scale

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Mechanical Responses and Damage Morphology of Laminated Fabrics with a Central Slit under Uniaxial Tension: A Comparison Between Analytical and Experimental Results

Analysis and Evaluation of Strengthening Effect of Inflatable Rings on Soft Stratospheric Airship

Mechanical Properties and Strength Criteria of Fabric Membrane for the Stratospheric Airship Envelope

Experimental study and refined numerical simulation of ultimate pressure-bearing performance of rope-reinforced airship envelope structures

Experimental studies on tear failure of PVC coated fabric

Tearing behaviors of coated fabric membrane structures

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Response Characteristics of Elastic Parameters of Woven Fabrics in Stress Space and a Nonlinear Constitutive Analysis

Study on mechanical behavior of adhesively bonded laminated envelope composite joints

A novel mesoscopic progressive damage model for 3D angle-interlock woven composites

Study on Central Tearing Properties of Kapton Membrane

Modeling test strain data reveal shear damage evolution characteristic of CFRP laminates

Theoretical analysis for the axial tensile response of the mesoscopic model for filament-wound composites

Study on Mechanical Properties of High Performance Envelope Materials

Mechanical Behavior of 3D Woven Variable Thickness Composite Plate under Tensile Loading

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

A nonlinear analytical model for tensile failure prediction of pseudo-ductile composite laminates

Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model