Abstract:The dual five-axis machining machine is state-of-the-art equipment designed for producing thin-walled aerospace parts like skins and panels. It comprises two five-axis machine tools with mirrored synchronous motions: one bi-rotary machine for milling and the other machine for follow-up support. The high absolute accuracy of the five-axis machine tools themselves and the high synchronous motion accuracy between the two machines are both crucial to ensure machining accuracy. This paper proposes an efficient method to measure and identify geometric and dynamic errors of dual five-axis machine tools. Using the R-test combined with three measurement trajectories to measure the absolute motion error of two five-axis machine tools and the synchronous motion error between the two machines. The designed trajectories include the main rotary axis linkage conditions and can fully reflect the primary motion forms of the dual five-axis machine tool. The main position-independent geometric errors and rotational axis linkage dynamic errors are identified by converting quasi-static and dynamic measurement data from three different trajectories into a unified reference coordinate system. The entire process requires only one instrument installation, effectively avoiding time-consuming repetitive installations and calibration processes while reducing the impact of installation errors on results. The effectiveness of the proposed method for measuring and identifying the geometric and dynamic errors is analyzed combined with Monte Carlo simulation. Experiments were carried out on a dual five-axis mirror milling system (MMS) with a 5000mm X-stroke. Both simulations and experiments confirmed that the proposed method is efficient in quickly identifying key error sources of the MMS.

Measurement method of perpendicularity, axis intersection, alignment error of five-axis simulator

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

Measurement Method of Initial Position and Attitude Alignment Error for Three-Axis Simulator

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Research on Position Alignment Method of a Three-axis Simulator

A Measurement and Separation Method for Perpendicular Errors of Rotary Axes

Three-point Method for Measuring the Geometric Error Components of Linear and Rotary Axes Based on Sequential Multilateration

Perpendicularity measurement method of 3-D large guideway with theodolite

Axis Intersection Measurement of Three-Axis Turntable with Two Crosshair Targets

An optical method based auto-collimation for measuring five degrees of freedom error motions of rotary axis

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

Method for measuring axis line intersection of three-axis turntable without luminous hole at the ends of shaft

One-step Measurement Method of Five-Axis Machine Tools Using a Laser Tracer

Measuring geometrical errors of linear axis of machine tools based on the laser tracker

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools

Kinematics Test and Evaluation of Tool Axis Direction Error for Five-axis Machine Tools

Analysis of Threeaxis Simulator Rotation Accuracy's Influence on Measurement Accuracy

Identification of Geometric Errors of Rotary Axes on 5-Axis Machine Tools by On-Machine Measurement