Abstract:Abstract Error compensation has become an important means of improving the manufacturing and processing accuracy of computer numerical control (CNC) machine tools. Quick and precise measurement of the various geometric motion errors (GMEs) of CNC machine tools is crucial. We propose a novel laser method for the efficient and direct high-precision measurement of the 21 GMEs of a three-axis CNC machine tool, or three linear axes of a five-axis tool. A corresponding system was developed, comprising a fiber-coupled laser unit, sensor head, target unit, and beam-steering unit. The beam-steering unit was designed to perform high-accuracy 90° rotation of the measuring beam, and the target unit was designed to be sensitive to 18 GMEs of the three linear axes. Stability, repeatability, and comparison experiments were conducted to verify the performance of the proposed system. The results showed that the stability of the position error measurement is ± 6.3 nm. For straightness error measurement, the stability, repeatability error, and residual are within ± 60.3 nm, ± 0.5 μm, and ± 0.7 μm, respectively. These are within ± 0.12 arcsec, ± 0.5 arcsec, and ± 0.5 arcsec for the pitch and yaw measurements, and within ± 0.37 arcsec, ± 1.5 arcsec, and ± 1.0 arcsec for the roll measurements, respectively. For squareness error measurement, the repeatability error and residual are within ± 0.6 arcsec and ± 1.6 arcsec, respectively. Compared with a laser interferometer, the proposed system can measure the 21 GMEs of a three-axis machine tool with one-step installation. Without accuracy loss, the measurement efficiency is approximately 45 times higher than that of a laser interferometer, thus providing a new quick and accurate measurement method of GMEs and error compensation of CNC machine tools.

Three-point Method for Measuring the Geometric Error Components of Linear and Rotary Axes Based on Sequential Multilateration

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

The technical method of geometric error measurement for multi-axis NC machine tool by laser tracker

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Fast Detection of Geometric Errors for Three-Axis Machine Tools with Combined Double-Ball Bars Based on Spatial Circle Detection

A high-precision laser method for directly and quickly measuring 21 geometric motion errors of three linear axes of computer numerical control machine tools

A Measurement and Separation Method for Perpendicular Errors of Rotary Axes

Vision measurement system for position-dependent geometric error calibration of five-axis machine tools

Modeling, identification, and measurement of geometric errors for a rotary axis of a machine tool using a new R-test

Geometric Error Identification of Gantry-Type CNC Machine Tool Based on Multi-Station Synchronization Laser Tracers

Geometric Error Identification and Compensation of Linear Axes Based on A Novel 13-Line Method

Full-scale Measurement of CNC Machine Tools

Volumetric error identification for CNC machine tool based on multi-body system and vector diagonal measurement

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools

The Tool Following Function-Based Identification Approach for All Geometric Errors of Rotary Axes Using Ballbar

A line measurement method for geometric error measurement of the vertical machining center