Abstract:Carbon Fiber Reinforced Polymer (CFRP) is extensively utilized in the cutting-edge industries, attributed to its superior mechanical performances. The machining performance of CFRP, however, is significantly influenced by its pronounced anisotropy, particularly the fiber orientation. Consequently, Fiber Cutting Angle (FCA) is widely employed to assess the relationships between cutting geometry and machining performance, yet the coupling of cutting orientation and fiber orientation, along with the absence of feeding angle, limits the further exploration into the underlying mechanisms. This article introduced a novel geometrical framework termed "Cutting Geometry Space" (CGS), for modeling CFRP machining process. Incorporating feeding orientation, cutting orientation and fiber orientation, CGS is applied in milling process for an enhanced comprehension of cutting geometry. Additionally, a pragmatic milling experiment is designed, efficiently evaluating the performances of 1092 combinations of CGS parameters in 13 T700-12K/epoxy CFRP specimens. Microscopical observations and morphological analyses reveals four predominant fracture mechanisms in CFRP machining, with fiber-matrix debonding and bending-induced fracture identified as the key contributors to macroscopic cavity formation. A designated "Damage Zone" within the CGS, encompassing a cutting angle range of 90 degrees-270 degrees degrees -270 degrees and a fiber tilt angle of 15 degrees-60 degrees, degrees -60 degrees , is identified as a high-risk area for machining-induced surface cavities. Additionally, the impact of feeding orientation on the surface integrity is confirmed and explained by the influence on the equivalent FCA. Furthermore, the study elucidates chatter marks as a phenomenon induced by a confluence of factors, including generalized down milling, high FCA, and a significant effective cutting fiber count. The observed shift in chatter mark with varying feeding angles provides deep insights into the complex dynamics of machining parameters.

Influence of fiber cutting angle on the machining defects during slotting of CFRP

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Influence of Fibre Orientation on the Slotting Quality of CFRP Composites Using the Multi-Tooth Mill

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Optimizing 5-Axis Tool Positioning and Orientation for Machining CFRP Curved Surfaces: Considering Fibers’ Orientation

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Experimental study on wear laws and mechanisms of end cutting edge in end-milling of carbon fiber reinforced polymer

Study on the formation mechanism of cutting surface of carbon fiber-reinforced composites

Investigation of CFRP cutting mechanism variation and the induced effects on cutting response and damage distribution

Machining inclination selection method for surface milling of CFRP workpieces with low cutting-induced damage

Planning of cutting tool feed direction for low-damage surface milling of CFRP: considering the changes in the action form of the tool edge on fiber

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Effect of chatter on material removal during surface milling of thin-walled carbon fiber–reinforced plastic (CFRP) components

Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates

Effect of Grinding Parameters on Industrial Robot Grinding of CFRP and Defect Formation Mechanism

Partition Five-Axis Surface Machining of CFRP Laminate Structures Considering Fiber Orientation

Novel fiber fracture criteria for revealing forming mechanisms of burrs and cracking at hole-exit in drilling Carbon Fiber Reinforced Plastic

Research on CFRP cutting mechanism by the micro-textured tool using macroscopic and microscopic numerical simulations

Effect of Z-pin Insertion Angles on Low-Velocity Impact Mechanical Response and Damage Mechanism of CFRP Laminates with Different Layups