Abstract:In recent years, failings of girders due to overturning in continuous girder bridges have repeatedly occurred in China. To investigate the overturning collapse mechanism and also to evaluate the rationality of anti-overturning design method using beam element models that are commonly adopted in practical design, detailed 3D finite solid element models of a typical single-column pier three-span continuous box girder bridge were built and a full-range numerical analysis of the models was conducted. The solid models included the prestressing effect and diaphragms. Both boundary and geometric nonlinearities were taken into consideration. Bearings were modeled considering the actual construction and dimensions of pot rubber bearings, the material characteristics and boundary conditions of rubber pads, and the contact properties between each part of the bearings. The analysis results revealed that the behavior of the bridge approached the nonlinear state at the onset of first bearing disengagement; the rotation (overturning) mechanism of the girder was gradually transitioned from deformable-body rotation to rigid-body rotation; all the end and middle bearings had been disengaged totally or locally at ultimate overturning failure. The analysis results also showed that bearing disengagements would lead to the ineffectiveness of the constraint in the transverse direction, which significantly reduced the overturning ultimate load and structural ductility before the final collapse. Prior to the first bearing disengagement, the vertical reactions calculated from the beam model were in good agreement with those from the solid model, while the transverse reactions were not. The behaviors were inaccurate after bearing disengagement in the beam models in which the movement of the rotation axis and transition of rotation mechanism failed to be realized. Reliable transverse stoppers and tensile anchors at bearing sections were recommended to efficiently improve anti-overturning stability and ductility in practical design.

Anti-overturning stability analysis for three-span continuous curved girder bridge with single column pier

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Stability Analysis of Yinxian Second Bridge

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Collapse Mechanism and Full-Range Analysis of Overturning Failure of Continuous Girder Bridges

Experimental and Numerical Investigation of the Anti-Overturning Theory of Single-Column Pier Bridges

Bearing capacity analysis of a curvilinear box girder landscape bridge

Analysis of In-plane Stability Performance of Large Span Steel Structure Curved Box-girders

Nonlinear Stability Analysis of a Composite Girder Cable-Stayed Bridge with Three Pylons during Construction

Analysis of Sensitive Factors of Long-Span Continuous Rigid Frame Bridge'S Stability with Thin-Wall Piers in the Construction Stage

Static Characteristic Analysis of Long Span Continuous Curved Steel Box Girder Bridge

Failure Analysis for Overall Overturning of Concrete Single-Column Pier Bridges Induced by Temperature and Overloaded Vehicles

Safety Assessment of Large Span Cable-stayed Bridge

Nonlinear Stability Analysis of Long-span CFST Arch Bridge