Abstract:The study aims to further standardize the construction process, improve the construction quality, and ensure the stability of infrastructure construction. The continuous rigid-frame bridge is taken as the research object, the finite element model of the bridge body is established by using the beam element, and the overall stability of the rigid-frame bridge is analyzed in the construction and completion stages. Moreover, the stability coefficient and buckling mode are established under different working conditions in each stage, the linear stability variation law is summarized, and the geometric nonlinear stability analysis method is established through the specific data. The nonlinear stability safety factor and buckling mode are obtained, and the influence of wind load and initial defects on the stability of continuous rigid-frame bridge is further explored. The results show that with the increase of the bridge height, the overall stability factor of the bridge is decreasing, and the safety factor of the single-limb thin-walled hollow pier is relatively larger than that of the double-limb thin-walled hollow pier. During the construction, the asymmetric self-weight load caused by the asynchronous load and cantilever pouring has the greatest impact on the stability of the bridge. The stability safety factor of the geometric nonlinear stability analysis method constructed is 0.3% and 1.27% lower than the ideal state, respectively. The stability safety factor of the wind load and the initial defect is 12.65% lower than the ideal state, and the stability safety factor is greatly reduced. The results have important reference significance to ensure the construction safety and overall stability of the bridge.

Analysis of Sensitive Factors of Long-Span Continuous Rigid Frame Bridge'S Stability with Thin-Wall Piers in the Construction Stage

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

Stability Analysis of Yinxian Second Bridge

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Analysis of Wind-resistant and P-Δ Behavior of Continuous Rigid Frame Bridge with High-pier under Construction

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

The Influence of Buckling Mode and Buckling Stability Coefficient of Rigid-Frame Bridge during Construction in Cold Region

Nonlinear Stability Analysis of a Composite Girder Cable-Stayed Bridge with Three Pylons during Construction

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Effective length coefficient of pier of multi-span continuous rigid-frame bridge based on transfer matrix method with branch

Research on Rational Post Successive Prestress Tension Sequence of Simply Supported and Continuous Box Girder Bridge

Stability analysis of the steel structure of tianjin bengbu bridge

Reliability Analysis of Foundation Structures of Offshore Long-span-bridges on Serviceability Limit States

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Simulating analysis of cantilever casting of prestressed concrete bridge

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge