Abstract:The bow wave generated by a steadily advancing ship is considered for a family of fine ruled ship bows with rake and flare. This family of ship bows is defined in terms of four parameters: the ship draft D, the entrance angles a and a' at the top and bottom waterlines, and the rake angle 8. The corresponding bow wave similarly depends on four parameters: the draft-based Froude number F and the three angles a, a', and 8. An extensive parametric study, based on thin-ship theory, is performed to explore the variations of the water height Z0 at the ship stem X = 0, the location X0 (measured from the ship stem) of the intersection of the bow-wave profile with the mean free-surface plane Z = 0, and the bow-wave profile, with respect to the four parameters F, a, a', and 8. This parametric study extends the previously reported similar study of the height Zb of the bow wave and the location Xb of the bow-wave crest. These two complementary parametric studies yield simple analytical relations, which extend relations given previously for wedge-shaped ship bows without rake or flare. In spite of their remarkable simplicity, the analytical relations given here yield bow waves that are comparable to computational fluid dynamics (CFD) waves given by Euler-flow calculations. The analytical relations, which explicitly account for the influence of the four primary parameters F, a, a', and 8, can be used immediately—without hydrodynamic calculations—for ship design, notably at early design stages when the precise hull geometry is not yet known. The study also provides insight for ship bow design. Specifically, it suggests that a bow with positive rake and negative flare may be beneficial, and that a bulb located aft of the stem and integrated with the hull may be an advantageous alternative to a traditional bulb protruding ahead of the bow, in agreement with the results of a hull-form optimization analysis.

Influence of Bowshape on Hydrodynamic Performance of Mono Wave-Piercing Craft

Research on the Hydrodynamic Performance of a Pentamaran in Calm Water and Regular Waves

Hull forms of small high-speed wave-piercing monohull crafts and hydrodynamics study

Experimental Study on the High Speed Mono-Wave-Piercing Boat

Analysis of the hull form and sailing characters in calm water of a semi-planing wave-piercing boat

Investigation on hydrodynamics of fast ships with different bowshapes in waves and restricted waters

Influence of Bowshape on Hydrodynamic Performance of High Speed Vessels in Head Seas

Numerical study of icebreaking process with two different bow shapes based on developed particle method in parallel scheme

Numerical Simulation of Bow Waves Generated by a Rectangular Plate

Cfd And Efd Based Studies Of Hull Wetness Of Fast Mono-Wpc

Numerical analysis of continuous icebreaking performance of icebreakers with different bow types

Sensitivity Analysis of the Effect of Speed and Inclination Angle on Water-Entry Slamming Pressure of the Bow

Influence of bow shape and model scale on the natural transition in boundary layers on underwater axisymmetric bodies with a superhydrophobic surface

Analytical Bow Waves for Fine Ship Bows with Rake and Flare

Experimental Study on the Influence of Bulbous Bow Form on the Velocity Field Around the Bow of a Trimaran Using Towed Underwater 2D-3C SPIV

A comprehensive review on hull forms and relevant researches of wave piercing vessels

Delayed Detached Eddy Simulation Method for Breaking Bow Waves of a Surface Combatant Model with Different Trim Angle

Numerical study of air cavity characteristics of bow wave breaking of KCS ship under different speeds

Experimental Study on the Influence of a T-foil and Bulbous Bow on the Resistance and Motion in Regular Head Waves of Trimarans

Experimental Study and Numerical Simulation of the Water Entry of a Ship-Like Symmetry Section with an Obvious Bulbous Bow

Scale effects on bow wave breaking of KCS ship model: Insights from DDES investigations