Abstract:The impact between the flared bow and the wave will cause a serious bow-flared slamming load. Many investigations have been carried out to predict the slamming load that the hull suffers under severe sea states. With the wide use of the hull structure response monitoring system, it will be of great significance to investigate the ship slamming problem if the slamming load can be identified by using the hull structure response monitoring data in the actual navigation environment. This paper integrates the seakeeping method, computational fluid dynamics method and finite element method to systematically simulate the bow-flared slamming pressure and the local structural response of a large container ship. Through comparative analysis of the dynamic response and static response of the bow-flared structure under extreme slamming load, it is found that the dynamic effect of the bow-flared structure is not obvious. Three different static load identification methods are used to identify the simple static load acting on the flared structure of the bow. By comparing the results of different identification methods, it is found that the TRM + L_curve method can realize the most accurate identification of the simple load. Further, the dynamic response process of the bow-flared structure is regarded as a quasi-static process, and the slamming pressure histories acting on the flared region can be identified. In general, the identification results of the bow-flared slamming pressures are in good agreement with the original slamming pressures, which preliminarily verifies the availability of the present method in the indirect monitoring of the bow-flared slamming load of the large container ship.

Sensitivity Analysis of the Effect of Speed and Inclination Angle on Water-Entry Slamming Pressure of the Bow

Formulations of Hydrodynamic Force in the Transition Stage of the Water Entry of Linear Wedges with Constant and Varying Speeds

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Numerical investigations of a 2D bow wedge asymmetric free-falling into still water

Experimental investigation on the slamming loads of a truncated 3D stern model entering into water

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Research on the bow-flared slamming load identification method of a large container ship

Investigation of trimaran slamming under different conditions

Experimental study of slamming pressure for a trimaran section with different drop heights and heel angles

Symmetrical and asymmetrical water entry of a three-dimensional bow-flared section by a Cartesian grid multiphase flow model with multiple DOF motion

Numerical investigation on the slamming loads of a truncated trimaran hull entering regular waves

Experimental investigation of slamming characteristics of stiffened elastic wedges with different deadrise angles: Part I–Slamming pressure

CFD-FEM simulation of hydroelastic responses and slamming loads of a bow-flare ship advancing in head regular waves

Experimental Study and Numerical Simulation of the Water Entry of a Ship-Like Symmetry Section with an Obvious Bulbous Bow

Numerical study of slamming and whipping loads in moderate and large regular waves for different forward speeds

Numerical analysis of wet-deck slamming characteristics for trimaran section with different main-hull profiles

CFD Prediction of Ship Seakeeping and Slamming Behaviors of a Trimaran in Oblique Regular Waves

Slamming load and hydroelastic structural response of bow flare areas of aluminium fast displacement crafts

Kinematic response analysis of a three-dimensional lifeboat water entry based on smoothed particle hydrodynamics