Abstract:The manufacturing process is inevitably accompanied with the production of scraps, which leads to resource waste and environmental pollution. Recycling and remanufacturing are the most commonly used approaches for metal scraps due to their well-established advantages from economic and environmental perspectives. In this study, spinning experiments with 2195 Al-Li alloy tailor welded blanks produced by friction stir welding from metal scraps were conducted under different process parameter designs. And then the effects of various process parameters on spinning of thin-walled curved surface parts were systematically studied. The results of the corresponding experimental groups show that the roller attack angle, the spinning clearance, and the installation method of tailor welded blanks have the most significant effect on the weld torsion angle. In addition, it was found that along the longitude direction of spun parts, the surface roughnesses of the weld of spun parts were greatly improved under the roller nose radius of 10 mm, the spinning clearance of 1.0 mm, the constant linear velocity, and the installation method of tailor welded blanks (the lower surface of tailor welded blanks is spun by rollers), while the process parameters have little significant effect on the surface roughness along the latitude direction of spun parts. Furthermore, it can be concluded that the forming profiles of spun parts fitted the mandrel well under the roller nose radius of 6 mm, double rollers, the roller attack angle of 30° and 45°, spinning clearance of 1.5 mm, and the installation method of tailor welded blanks (the upper surface of tailor welded blanks is spun by rollers). The research results will provide guidance for the precise spinning of thin-walled curved surface parts with tailor welded blanks. Thereby, it is also beneficial for green manufacturing involving recycling and remanufacturing of metal scraps.

Research on Design Method of Variable Thickness Blanks for Aluminum Alloy Head Spinning Forming

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Study on Spinning Process of Thin-Walled Curvilinear Generatrix Parts Based on Variable Thickness Blanks

Study on the spinning process of thin-walled aluminum alloy vessel head

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

Research on 5A06 Aluminium Alloy Thin-wall Semisphere Hydromechanical Deep Drawing Process

Study on Spinning Process of A Thin-Walled Aluminum Alloy Vessel Head with Small Ratio of Thickness to Diameter

Experiment of Laser Assisted Shear Spinning for Aluminum Alloy Spherical Thin-Walled Parts

Analysis of ball spinning formability of thin-walled tubular parts of aluminum alloy

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts

Study of Dieless Radial Spinning for Thick-Walled Cylindrical Parts With External Grooves

Numerical Simulation of Stamping-Spinning Hybrid Process for Aluminum Alloy Hemispherical Shells

Research on a New Counter-Roller Active Spinning Process for Forming Al Alloy Thin-Walled Cylinders

Forming Quality of Heat Spinning for the Ni-Cr-W-Mo Superalloy Workpiece with Strange Shape

Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet

Study on Flange-Constrained Spinning Process for Hemispherical Aluminum Alloy Part

Research on power spinning process of 2A12 aluminum alloy thin-walled parts

Numerical simulation of spinning forming of A356 aluminum alloy hub using dual spinning rollers

Research on the Multi-Pass Shear Spinning Technology of Small-Angle Conical Workpieces

Control of the blank-holder force to improve the formability of aluminum alloy sheet

A Systematic Study on the Effects of Process Parameters on Spinning of Thin-Walled Curved Surface Parts With 2195 Al-Li Alloy Tailor Welded Blanks Produced by FSW