Abstract:The physical and engineering properties of remolded clays are intrinsic and can be used as a frame of reference for the behavior of clay. Compressibility and permeability of remolded Bangkok clay at different ion concentrations and valences were compared with kaolin and bentonite as representatives of non- and high swelling clays. Bangkok clay, a low-swelling clay, exhibited physical and engineering properties similar to those of kaolin. The texture of coagulated Bangkok clay became a more flocculated structure with increasing ion concentration and valence, resulting in higher water holding capacity and liquid limit. Even though the physical properties of all tested clays varied significantly with pore water chemistry, the (PI, LL) points lied above the A-line in the plasticity chart (where PI is the plasticity index and LL is the liquid limit) and could be represented by a unique relationship. The change of the intrinsic compressibility and permeability with the concentration and valence of the ions was interpreted by a generalized stress state e/eL. The lower e/eL value was associated with higher shear strength (resistance to vertical consolidation pressure in K0-consolidation) and lower permeability. As the ion concentration and valence were increased for both kaolin and Bangkok clay, the resistance to consolidation pressure increased and permeability decreased for the same void ratio due to the decrease in e/eL. The liquid limit for bentonite decreased with increasing ion concentration and valence due to the compression of the diffuse double layer. Hence, for the same void ratio, the resistance to consolidation pressure decreased and permeability increased due to the increase of e/eL. Finally, relationships of the modified void index, I′v and consolidation pressure, σ′v, and generalized stress state e/eL and permeability k were proposed. These relationships are useful and practical tools for assessing the intrinsic compressibility and permeability of non- to high-swelling clays in terms of liquid limit, which is easily obtained from conventional laboratory tests.

Factors influencing permeability anisotropy of remolded kaolin

Effect of Traffic Load on Permeability of Remolded Kaolin

Study on Anisotropic Permeability Model for Mixed Kaolin-Montmorillonite Clays

Experimental Study on Nonlinear Permeability Characteristics of Xiaoshan Clay

Standard exploration of permeability coefficient test for clay by HCA

Effects of Pore-Size Distribution on the Gas Diffusion Coefficient and Gas Permeability of Compacted Manufactured Sand Tailing-Bentonite Mixtures

Laboratorial Study on Non-Darcy Seepage in Xiaoshan Clay

Seepage test by HCA for remolded kaolin

Permeability and anisotropy of upper Shanghai clays

Changing Mechanism of Microstructure of Intact Soft Clay Considering Anisotropy

Change of hydraulic conductivity during compression of undisturbed and remolded clays

Influence of Soluble Salt on Electro-Osmotic Consolidation of Soft Clay

Experimental Study on the Effect of Soil Saturation on the Electric Permeability Coefficient During Electroosmosis Process

Experiment analysis on permeability of silty clay in coastal area

Anisotropy Study on the Process of Soil Permeability and Consolidation in Reclamation Areas: A Case Study of Chongming East Shoal in Shanghai

Compressibility and Permeability of Bangkok Clay Compared with Kaolinite and Bentonite

Study on 1-D Nonlinear Consolidation Behavior for Ningbo Soft Clay with Threshold Gradient

Pore-scale study on the characteristic hydraulic conductivity of a dispersive lean clay affected by salinity and freeze–thaw

EXPERIMENTAL STUDY OF PERMEABILITY OF REMOLDED MALAN LOESS

A Law Of Change In Permeability Coefficient During Compression Of Remolded Clays

Characterization of macropore structure of remolded loess and analysis of hydraulic conductivity anisotropy using X-ray computed tomography technology