Pore-scale study on the characteristic hydraulic conductivity of a dispersive lean clay affected by salinity and freeze–thaw
Yan Han,Qing Wang,Jing Liu,Weitong Xia,Jiaqi Wang,Jiejie Shen,Yating Chen
DOI: https://doi.org/10.1007/s10064-022-02608-z
IF: 4.2
2022-01-01
Bulletin of Engineering Geology and the Environment
Abstract:Research into the permeability of dispersive soils featuring high erodibility remains rather limited, especially from a pore-scale perspective. This study focused on the relationship between permeability of remolded dispersive soil (lean clay) and its initial pore scale characteristics, via constant-head permeation and mercury intrusion porosimetry (MIP) tests, with consideration of soil salinity and freeze–thaw (F-T) effects. Main findings are as follows. The peak hydraulic conductivity ( k max ) appeared at the initial permeation stage linked initial pore-scale parameters. Pores inside of soil could be classified into two groups (> 10 and < 10 μm) based on MIP results. Increase in salt contents led to increased volume of pores > 10 μm ( V p >10 ) and porosity ( n ), but decreasing tortuosity ( τ ) and fractal dimension ( D f ). In addition, 5 F-T cycles maximized V p >10 and n but minimized τ , and D f reached its maximum after 10 cycles. Correlation analyses found that V p >10 , n and τ correlated with k max ; a combined variable nd ave 2 showed better correlation to k max than others regarding pore diameter; besides, and no correlation was found between D f and k max , but D f should not be ignored as it described the complexity of pore structure. Finally, based on grey relation entropy method, the above pore-scale parameters were extracted to compare their contributions under coupled effects of salinity and F-T to the variation in k max . The following order of importance was found: nd ave 2 ≈ V p >10 > n > D f > τ . Moreover, single impact of F-T on the contribution ranking was less intense than that of salinity.