Abstract:Compared with the direct force measurement of cables, dynamic modal testing is more economic and applicable in engineering for monitoring the stiffness change of cable net structures caused by pretension deviation. Normally, it is sufficient to detect the variation of structural key stiffness by testing a few modes (target modes) that are, however, likely located in the region of dense modes. To effectively evaluate the stiffness of an existing cable net structure, the identification accuracy of these target modes should be improved when using conventional time-domain methods, e.g., the eigensystem realization algorithm (ERA). Structural free vibration can be induced by a step excitation that is generated by simultaneously releasing loads hung on the cable net. In this paper, the modal energy in the structural free vibration response is expounded to be determined by the work done by the step excitation loads in the direction of this mode shape. Therefore, the identification accuracy of a target mode can be improved by optimizing the layout and magnitude of the suspended loads to increase its energy proportion in the structural free vibration response and suppress those of its adjacent modes. For a certain set of degrees of freedom (DOFs) that loads are allowed to be suspended, a method is put forward to construct a step excitation load that can guarantee that the suppressed modes do not have an energy contribution to its induced free vibration. Referring to the effective independence (EI) method, an iterative algorithm is developed to select a given number of DOFs for the suspension of the step excitation loads that can ensure the target mode has a relatively large energy proportion. With the solution of generalized Rayleigh entropy, the magnitude of the loads suspended from the selected DOFs is further optimized to achieve the maximum energy proportion of the target mode. An illustrative saddle-shaped cable net roof is employed to validate the accuracy and validity of the proposed method by comparing the modal identification results under the optimized step excitation, conventional impact excitation and random excitation, respectively.

Method for identifying modal parameters of closely spaced modes of cable domes by optimizing step excitations

Modal Testing and Detection of Pretension Deviation in a Cable Dome Structure

Identification of Aerodynamic Damping of Cable Domes

A Step Excitation Optimization Method for Intensive Modal Identification of Cable Net Structures

Natural Vibration Analysis of Bird-Nest-pattern Cable Domes

Wind-Induced Vibration Analysis of a Pentagonal Three-Four Strut Hybrid Open-Type Cable Dome

A study on the aerodynamic damping of the Geiger type cable dome

Optimization design of a cable dome structure based on reliability

A Multi-Task Learning-Based Automatic Blind Identification Procedure for Operational Modal Analysis

DEEP LEARNING-BASED AUTOMATIC BLIND IDENTIFICATION PROCEDURE FOR STRUCTURAL MODAL IDENTIFICATION

Optimal Design of Cable-domes with Multi-overall Selfstress Modes

Determination of Target Modes for Monitoring the Stiffness of Cable Domes Considering Random Pretension Deviations

Mode Shape Expansions for the Dynamic Testing of Cable Domes Considering Random Pretension Deviations

Selfstress mode analysis and optimal design of Kiewitt domes

Summary of methods eliminating spurious modes in automatic modal parametric identification

Nonlinear analysis and optimum design of cable domes

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

Application of stochastic subspace identification for stay cables with an alternative stabilization diagram and hierarchical sifting process

Parameters identification of closely spaced modes with the covariance-drivern stochastic subspace and damping ratio dispersion method

A three-stage criterion method for extracting local vibration modes of tensioned cables in beam string structures

Damping identification using weighted fitting of Frequency-response-function (WFF) method