Abstract:Compared with the direct force measurement of cables, dynamic modal testing is more economic and applicable in engineering for monitoring the stiffness change of cable net structures caused by pretension deviation. Normally, it is sufficient to detect the variation of structural key stiffness by testing a few modes (target modes) that are, however, likely located in the region of dense modes. To effectively evaluate the stiffness of an existing cable net structure, the identification accuracy of these target modes should be improved when using conventional time-domain methods, e.g., the eigensystem realization algorithm (ERA). Structural free vibration can be induced by a step excitation that is generated by simultaneously releasing loads hung on the cable net. In this paper, the modal energy in the structural free vibration response is expounded to be determined by the work done by the step excitation loads in the direction of this mode shape. Therefore, the identification accuracy of a target mode can be improved by optimizing the layout and magnitude of the suspended loads to increase its energy proportion in the structural free vibration response and suppress those of its adjacent modes. For a certain set of degrees of freedom (DOFs) that loads are allowed to be suspended, a method is put forward to construct a step excitation load that can guarantee that the suppressed modes do not have an energy contribution to its induced free vibration. Referring to the effective independence (EI) method, an iterative algorithm is developed to select a given number of DOFs for the suspension of the step excitation loads that can ensure the target mode has a relatively large energy proportion. With the solution of generalized Rayleigh entropy, the magnitude of the loads suspended from the selected DOFs is further optimized to achieve the maximum energy proportion of the target mode. An illustrative saddle-shaped cable net roof is employed to validate the accuracy and validity of the proposed method by comparing the modal identification results under the optimized step excitation, conventional impact excitation and random excitation, respectively.

Determination of Target Modes for Monitoring the Stiffness of Cable Domes Considering Random Pretension Deviations

Modal Testing and Detection of Pretension Deviation in a Cable Dome Structure

Numerical Analysis of the Pretension Deviations of a Novel Crescent-Shaped Tensile Canopy Structural System

Mode Shape Expansions for the Dynamic Testing of Cable Domes Considering Random Pretension Deviations

Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

Wind-Induced Vibration Analysis of a Pentagonal Three-Four Strut Hybrid Open-Type Cable Dome

Analytical Study of Structural Conformation and Prestressing State of Drum-Shaped Honeycomb Quad-Strut Cable Dome Structure with Different Calculation Methods

Sensitivity Analysis of Suspen-Dome on Imperfect State

Conformation and static performance analysis of pentagonal three-four strut hybrid open-type cable dome

STRUCTURAL MORPHOLOGY AND DYNAMIC CHARACTERISTICS ANALYSIS OF DRUM-SHAPED HONEYCOMB-TYPE III CABLE DOME WITH QUAD-STRUT LAYOUT

Experimental research on construction of a Kiewitt dome model pre-tensioned by different schemes

Sensitivity analysis on responses of adaptive cable-strut tensile structure with length changeable elements

Initial Pre-Stress Finding Procedure and Structural Performance Research for Levy Cable Dome Based on Linear Adjustment Theory

Study on Prestress Distribution and Structural Performance of Heptagonal Six-Five-strut Alternated Cable Dome with Inner Hole

Selfstress mode analysis and optimal design of Kiewitt domes

Optimal Design of Cable-domes with Multi-overall Selfstress Modes

Sensitivity Analyses of Cables to Suspen-Dome Structural System

Selfstress mode analysis and optimal prestress design of cable-strut tension structures

FAILURE MODE AND BEHAVEIOR ANALYSIS OF TWO TYPES OF CABLE DOMES

Method for identifying modal parameters of closely spaced modes of cable domes by optimizing step excitations

A Step Excitation Optimization Method for Intensive Modal Identification of Cable Net Structures