Abstract:This study has designed and manufactured Ti-6Al-4V hollow lattice specimens with different strengthening-structure distributions, namely, basic hollow lattice structure (specimen BS), hollow lattice structure strengthened at the nodes (specimen SN), and hollow lattice structure strengthened at the tube walls (specimen SW). The effects of the strengthening-structure distribution and shape parameter on the quasi-static mechanical behavior of the hollow lattice structures were investigated using experimental test and numerical simulation. The experimental results showed that compared with specimen BS, the specific elastic modulus and specific ultimate strength of specimen SN were reduced by 7% and 12%, respectively. Meanwhile, the elastic modulus, ultimate strength, and specific ultimate strength of specimen SW increased by 20%, 49%, and 13%, respectively. The collapse position of specimen SN occurred at the struts, whereas that in specimen SW was at the nodes. The different distributions of the strengthening structure induced changes in the structural weakness, stress distribution, and load-bearing capacity of the cells. Therefore, these three specimen types exhibited different failure characteristics and mechanical properties. Among the three specimens, only the strengthening structures of specimen SW reinforced the structural weaknesses and improved the load-bearing capacity of the cells. Hence, specimen SW demonstrated a significant advantage in terms of mechanical property. In addition, the numerical simulation studied the effect of the shape parameters of the strengthening structure on the mechanical property of specimen SW. The simulation results indicated that when the ratio of the strengthening-structure height to the hemi-cell height was 0.6 or that of the strengthening-structure thickness to the internal diameter of the hollow strut was 0.1875, the strengthening structure of the cells became more balanced and the load-bearing capacity became stronger than those in the other types. Therefore, based on our work, we can conclude that a reasonable structural design is conducive in obtaining a lightweight structure with superior mechanical properties.

Compressive Mechanical Properties of New Type of Hollow Sphere Structure

Experimental and Numerical Studies on Compressive Mechanical Properties of Hollow-Sphere Structures with Perforations

Numerical Study on the Elastic Properties of Perforated Hollow Spheres Structure in Body-Centered Cubic Pattern

Investigations of the Compressive Mechanical Properties of Open-Cell Hollow-Sphere Structures

Enhanced compressive properties of additively manufactured hollow sphere materials with novel configurations

Compression Behavior of Individual Thin-Walled Metallic Hollow Spheres with Patterned Distributions of Microporosity

Probing Buckling and Post-Buckling Deformation of Hollow Amorphous Carbon Nanospheres: In-situ Experiment and Theoretical Analysis

Compressive Mechanical Properties and Energy Absorption of Cubic Spherical Hollow Cellular Material Based on the Rod and Curved Surface Structure

A Partially Hollow BCC Lattice Structure with Capsule-Shaped Cavities for Enhancing Load-Bearing and Energy Absorption Properties

Spherical porous structures for axial compression

Design, Mechanical Properties and Optimization of Lattice Structures with Hollow Prismatic Struts

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Compressive Behavior of Hollow Triply Periodic Minimal Surface Cellular Structures Manufactured by Selective Laser Melting

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Simulation Study of Compressive Mechanical Properties of Spheroidal Cytosolic Lattice Structures

Effect of plate lattice-filling on the compressive mechanical property of 3D-printed square honeycombs

A Novel Hierarchical Thermoplastic Composite Honeycomb Cylindrical Structure: Fabrication and Axial Compressive Properties

Similarities of the Mechanical Responses of Body-Centered Cubic Lattice Structures with Different Constituent Materials under Compression

Uniaxial Compression Mechanical Behavior of Ti-6Al-4V Hollow Lattice Structures

Effective mechanical properties of solid filled by hollow nanospheres