Abstract:Lattice structures are bio-inspired designs made up of repeated unit cells consisting of beams, surfaces, or plates that fit together in an ordered or stochastic fashion. These unit cells are configured according to their size and shape in three dimensions. Simple lattices can be created using standard manufacturing techniques such as computer numerical control machining, welding, and casting. Additive manufacturing enables customers to make complex structures with small features at a reasonable cost. In the present work, using octagon, hexagrid, and rhombic dodecahedron lattice topologies, characterized by unit cell size from 3 × 3 × 3 to 7 × 7 × 7 mm and strut thickness from 0.5 to 1.5 mm, the structural behavior of a solid cylindrical model made of polylactic acid material under compression is analyzed. Finite element analysis (FEA) through Autodesk® Netfabb® solvers was used to assess lattice structure mechanical and structural properties. The results were validated by physical compression testing on additively manufactured samples. Cellular designs with 3 × 3 × 3 mm unit cells and 1.5 mm strut thickness displayed the lowest Von Mises stress and deformation. For different topologies, lowest results were rhombic dodecahedron (stress through FEA as 61.3108 MPa and stress through physical test as 61.05 MPa, deformation through FEA as 0.49921 mm and deformation through physical test as 0.48 mm), octagon (stress through FEA as 77.4147 MPa and stress through physical test as 76.92 MPa, deformation through FEA as 0.53316 mm and deformation through physical test as 0.51 mm), and for hexagrid (stress through FEA as 62.2911 MPa, stress through physical test as 62.15 MPa, deformation through FEA as 0.81997 mm and deformation through physical test as 0.81 mm). The percentage error between the stress through FEA and stress through physical test for octagon, hexagrid, and rhombic dodecahedron lattice topology was found out to be 0.63, 0.22, and 0.43%, respectively. Corresponding percentage deformation error between deformation through FEA and deformation through physical test was also found out to be 4.343, 2.435, and 3.848%, respectively. In addition, the impacts of volume reduction, surface area of the lattice, and relative density were explored pertaining to the structural behavior of the lattice. As a result of the examination into mechanical qualities based on these criteria, rhombic dodecahedron lattice topology with 3 × 3 × 3 mm unit cell size and strut thickness of 1.5 mm was found to be a better choice than octagon and hexagrid lattice topologies for 3D printing components that were loaded under axially compressive loads.

Similarities of the Mechanical Responses of Body-Centered Cubic Lattice Structures with Different Constituent Materials under Compression

Quasi-static Compressive Behaviors of Large-Size Titanium Lattice Sandwich Structure Based on Pulse Hot-Wire Arc Additive Manufacturing

Generative design and mechanical properties of the lattice structures for tensile and compressive loading conditions fabricated by selective laser melting

Mechanical Properties of Lattice Structures with a Central Cube: Experiments and Simulations

Compression Behavior of Pilar Octahedral Lattice Structures

Developing an Equivalent Solid Material Model for BCC Lattice Cell Structures Involving Vertical and Horizontal Struts

Thermal Behavior and Mechanical Properties of Different Lattice Structures Fabricated Using Selective Laser Melting

A Study on the Compressive Behavior of Additively Manufactured AlSi10Mg Lattice Structures

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Anisotropic compression behaviors of bio-inspired modified body-centered cubic lattices validated by additive manufacturing

Compression Behaviors and Mechanical Properties of Modified Face-Centered Cubic Lattice Structures under Quasi-Static and High-Speed Loading

Compressive properties of AlSi10Mg lattice structures with novel BCCZZ and FCCZZ configurations fabricated by selective laser melting

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis

Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing

In-Plane Compression Properties of Continuous Carbon-Fiber-Reinforced Composite Hybrid Lattice Structures by Additive Manufacturing

Mechanical characterization and constitutive modeling of additively-manufactured polymeric materials and lattice structures

Mechanical behaviour of a novel lattice structure with two-step deformation

Compression performance of 3D-printed thermoplastic auxetic structures

Mechanical Properties of Selective Laser Melting Processed Multi‐Hierarchical Lattice Structure Based on Body‐Centered Cubic Unit Cell

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting